5.7 Hemi to 6.1 Hemi ram swap ??
#1
Teching In
Thread Starter
Join Date: May 2009
Location: MN
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
5.7 Hemi to 6.1 Hemi ram swap ??
I have a friend who just hurt his motor in his 07 hemi ram using nitrous. He was wondering what needs to be done to swap a 6.1 in. I dont know dodges all that well. Any wiring, fabbing need to be done or is it a direct swap.
#3
On The Tree
Join Date: Jun 2007
Location: Cochrane, Alberta
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Direct swap for the short block. The Hemi cars and trucks have a different front cover and accessory location, but you can throw the old 5.7 heads (preferably ported) on the 6.1 block no problem.
#4
Not much but a little wiring changes are required. He may have to refer to a garage before the swap for the wiring connections. dodge car models list provides entire information on cars and wiring for dodge cars.
#5
TECH Enthusiast
Join Date: Oct 2007
Location: HOUSTON, TX
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
NO WIRING IS NEED AT ALL FROM THE WIRING HARNESS. If he sticks with the timing cover from the LX 6.1 he will have to rewire his alternator wire and redo his powersteering lines, along with the A/C lines. Other than that the 6.1L bolts up directly. He will have to reorganize the harness to fit the 6.1L intake and not have wires all over it
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
08-31-2015 12:05 PM