Let's See Your '88 Thru '98 Shortbed Truck!
10-31-2012, 06:35 PM
#112
Staging Lane
Some familiar trucks in here. Here's my bucket.
1990 454SS. I've owned it almost 22 years. Done all mods myself except for any paint (both sides are original paint and Bumper/grille/hood/roof/tailgate/roll pan all modified/painted). Engine block/oil pan/timing cover are original to truck. Nothing else on the motor is. Trans is T56. 4.56 rear gears/Eaton posi in original housing. 5"fr & 7"rr drop. 398rwhp/417rwtq. Motor dyno'd at Lingenfelter Performance 12 years ago 505 peak hp/535 peak tq.
1990 454SS. I've owned it almost 22 years. Done all mods myself except for any paint (both sides are original paint and Bumper/grille/hood/roof/tailgate/roll pan all modified/painted). Engine block/oil pan/timing cover are original to truck. Nothing else on the motor is. Trans is T56. 4.56 rear gears/Eaton posi in original housing. 5"fr & 7"rr drop. 398rwhp/417rwtq. Motor dyno'd at Lingenfelter Performance 12 years ago 505 peak hp/535 peak tq.
The following users liked this post:
David Leonard (03-20-2020)
11-03-2012, 09:13 AM
#113
Damn Tod!! Thats a clean azz SS!!! Love it!
This is my 1989 Chevy Silverado, SLEEPER lol mods are:
LQ4 6.0 swap
Sock long block including all bolts
216/220 .525/.525 114 cam with LS9 springs
Homemade front mount turbo system
Turbonetics TC76/68mm turbo
4" FMIC
Bosch 95# injectors
Bed mounted 20 gal fuel cell
Twin 255 inline pumps
4L80e trans w/HD-2 shift kit and STOCK converter
Detroit Tru-Trac w/4.10 gears and an aluminum girdle diff cover
It's still a work in progress (hence the stall & gears). I have a new turbo, BW S475 w/92mm T4 exhaust, Yank Pro triple disc converter and 3.42 gears on the way ;D I bought this truck from a good buddy of mine who's dad bought it brand new in 1988 near Fresno Ca, I now live in Sublette, ks.
With this current setup I've gone 12.3@122.65 with a 2.27 60ft on 11psi leaving off of idle.
This is my 1989 Chevy Silverado, SLEEPER lol mods are:
LQ4 6.0 swap
Sock long block including all bolts
216/220 .525/.525 114 cam with LS9 springs
Homemade front mount turbo system
Turbonetics TC76/68mm turbo
4" FMIC
Bosch 95# injectors
Bed mounted 20 gal fuel cell
Twin 255 inline pumps
4L80e trans w/HD-2 shift kit and STOCK converter
Detroit Tru-Trac w/4.10 gears and an aluminum girdle diff cover
It's still a work in progress (hence the stall & gears). I have a new turbo, BW S475 w/92mm T4 exhaust, Yank Pro triple disc converter and 3.42 gears on the way ;D I bought this truck from a good buddy of mine who's dad bought it brand new in 1988 near Fresno Ca, I now live in Sublette, ks.
With this current setup I've gone 12.3@122.65 with a 2.27 60ft on 11psi leaving off of idle.
11-03-2012, 09:28 PM
#114
1990 rcsb
Here is my burn out machine. Paint is Orange rot Mica (2007 porche color)
Did all the work my self with help of my cousin for the paint job.
1990 Chevy sport
383CI RHS Aluminum Head
mild roller cam - 650 demon carb - pump fuel
original 5 spd manual tranny - centerforce clutch
welded 10-bolt rear, custom ladder bars
Did all the work my self with help of my cousin for the paint job.
1990 Chevy sport
383CI RHS Aluminum Head
mild roller cam - 650 demon carb - pump fuel
original 5 spd manual tranny - centerforce clutch
welded 10-bolt rear, custom ladder bars
The following users liked this post:
David Leonard (03-20-2020)
11-04-2012, 06:33 PM
#115
Staging Lane
Thanks. I would imagine you get your setup dialed in it should fly. Mine has gone 12.67@109mph with my NA motor badly needing a tune, and a manual trans (clutches have been a major PITA since I put this together many years ago).
I made a few passes a month or so ago on my new clutch and only went 13.0s. My best 60' to date was a 1.74". I only made 3 passes on this last visit but couldn't do any better than a 1.98" 60'
I made a few passes a month or so ago on my new clutch and only went 13.0s. My best 60' to date was a 1.74". I only made 3 passes on this last visit but couldn't do any better than a 1.98" 60'
11-04-2012, 07:20 PM
#117
Staging Lane
12-05-2012, 08:20 PM
#118
Registered User
Join Date: Dec 2012
Location: NE Ohio
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Not much but slightly rusted 98 ECSB with a tired 305 and soon to be getting a 2001 6.0 LQ4 with a 4L65E. And maybe the rear end if I can convert the axles over to 5X5 bolt pattern. And of course weld new leaf spring perches on it.
12-09-2012, 07:44 PM
#120
been lurking a long time here, getting urge to go a little faster
'92 chevy silverado
355 roller, rhs pro torker heads, single plane, lt4 cam, longtubes, demon 650 carb, 700r4, 3.73/g80
6 lug swap- front rotors, rear 4x4 axle with disc brakes , hydroboost also
dropped is 5/6 ish with belltech spindles/spring (cut coil) and flip kit out back
still trying to figure out how i want it to look, havent put much into the cosmetic department, but mechanically most of the steering parts are new with poly bushings throughout
'92 chevy silverado
355 roller, rhs pro torker heads, single plane, lt4 cam, longtubes, demon 650 carb, 700r4, 3.73/g80
6 lug swap- front rotors, rear 4x4 axle with disc brakes , hydroboost also
dropped is 5/6 ish with belltech spindles/spring (cut coil) and flip kit out back
still trying to figure out how i want it to look, havent put much into the cosmetic department, but mechanically most of the steering parts are new with poly bushings throughout