WTT My SOM Z28 ROLLER FOR YOU RCSB ROLLER
#1
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Feb 2009
Posts: 681
Likes: 0
From: Shreveport La
Im looking to trade this car but must post a price so to keep it from being deleted price is $10,000 OBO Very negotiable.
Looking to trade my 2002 T-Top SOM M6 Z28 roller for a 99+ rcsb roller. I have a nice car and will expect a nice truck. The car has 14x,xxx miles on it but is pretty clean for the miles. It does have a few flaws like most and it is not in “perfect” condition. The top of the car behind the T-tops will need to be redone as it’s a common problem with f-bodies. The driver seat has a busted seam in the middle of the bottom section. The car has tan leather, power, tan carpet, no cracks in the dash which is getting hard to find. The car has 69 z28 badges on the front fenders and a bowtie mounted in the center of the billet grill.
The car will most likely come with,
stock camaro wheels with good tires
complete accessory setup
oil pan
lowering springs
m6 harness and ecm
slotted rotors on all 4 corners
adjustable bmr panhard bar
double adjustable lower control arms
strut tower brace
complete ls6 intake with injectors, rails, and t/b
Basically everything other than motor, trans, shifter, and exhaust.
I also have several parts in my shop that i bought for the car but are not included in the roller swap unless the truck comes with some goodies i can use or want.
moser 9'' housing and 31 spline axles
stock ford 3rd member that has ?3:50? gears Not 100% but can check
s&w sub frame connectors
s&w adjustable torque arm
southwestspeed steel driveshaft
weld rts black wheels F-body specific with 10's for the rear
weld wheels also come with tires, sportman front runners and 275/60 et streets on the rear
Im sure there is more but thats what i can come up with off the top of my head. If you have any questions feel free to ask. The car is sitting on jack stands in my shop at the moment so ill try to take pictures as detailed as possible tomorrow.
Reason im parting with the car. I picked it up a few months ago and put less than 400 miles on it before i pulled it apart and sold the motor and trans. I have a 370 and Jakes th400 that was going back in the car with a healthy shot of nitrous with plans of going deep 9's in a full interior street car with a/c and heat. Well plans have changed and i want a truck to daily/play in. If you have a nice roller and want something lighter to put your setup in please post some details and pictures. Thanks
The car is located in Shreveport Louisiana. I dont really want to drive across the country so maybe something will pop up in a reasonable driving distance.
Looking to trade my 2002 T-Top SOM M6 Z28 roller for a 99+ rcsb roller. I have a nice car and will expect a nice truck. The car has 14x,xxx miles on it but is pretty clean for the miles. It does have a few flaws like most and it is not in “perfect” condition. The top of the car behind the T-tops will need to be redone as it’s a common problem with f-bodies. The driver seat has a busted seam in the middle of the bottom section. The car has tan leather, power, tan carpet, no cracks in the dash which is getting hard to find. The car has 69 z28 badges on the front fenders and a bowtie mounted in the center of the billet grill.
The car will most likely come with,
stock camaro wheels with good tires
complete accessory setup
oil pan
lowering springs
m6 harness and ecm
slotted rotors on all 4 corners
adjustable bmr panhard bar
double adjustable lower control arms
strut tower brace
complete ls6 intake with injectors, rails, and t/b
Basically everything other than motor, trans, shifter, and exhaust.
I also have several parts in my shop that i bought for the car but are not included in the roller swap unless the truck comes with some goodies i can use or want.
moser 9'' housing and 31 spline axles
stock ford 3rd member that has ?3:50? gears Not 100% but can check
s&w sub frame connectors
s&w adjustable torque arm
southwestspeed steel driveshaft
weld rts black wheels F-body specific with 10's for the rear
weld wheels also come with tires, sportman front runners and 275/60 et streets on the rear
Im sure there is more but thats what i can come up with off the top of my head. If you have any questions feel free to ask. The car is sitting on jack stands in my shop at the moment so ill try to take pictures as detailed as possible tomorrow.
Reason im parting with the car. I picked it up a few months ago and put less than 400 miles on it before i pulled it apart and sold the motor and trans. I have a 370 and Jakes th400 that was going back in the car with a healthy shot of nitrous with plans of going deep 9's in a full interior street car with a/c and heat. Well plans have changed and i want a truck to daily/play in. If you have a nice roller and want something lighter to put your setup in please post some details and pictures. Thanks
The car is located in Shreveport Louisiana. I dont really want to drive across the country so maybe something will pop up in a reasonable driving distance.
Last edited by BadAssBowties; Dec 3, 2012 at 10:49 PM. Reason: Adding price
Thread
Thread Starter
Forum
Replies
Last Post
jscherbs
GM Parts Classifieds
5
Mar 24, 2017 07:20 PM




