98 camaro low miles (37k,H/C/I/E) 11.08 @ 121 N/A
Dec 2, 2009 | 01:49 AM
#1
98 camaro low miles (37k,H/C/I/E) 11.08 @ 121 N/A
Up for sale is a 1998 camaro that i bought from a member on here. the car is very clean and pulls really hard!
It has Tsp heads cam package, cam being a (232/234 595/598),Fast 92-92 unported,85 mm lid & k-n filter,85 mm maff,Pacesetter long tubes & y-pipe,Maganaflow catback,FLT lvl4 trans with a Yank pt4000 converter,373 gears in the stock 10 bolt,Bmr adj suspension- t-arm,p-hard & lcas,Convo pro with littles up front & 27x10 et streets out back or i will let it go with 17' torque thrust with 11's in the rear on new mt 315 drag radials!
All mods on this car started @ 30000 miles & the car now has 37xxx miles on it,it Dynoed 407 RWHP & 380 TQ on a Mustang dyno. car has ran 11.08 @ 121 with a 1.48 60 foot 2nd time to the track full weight & N/A, the stock 10 bolt is howling pretty good & i have know idea how much longer it will last........car should run a high 10.90 now after the addition of the 85 mm lid & 85 mm maf & we pulled the front & rear impact bars to drop a little weight.
the car has 35% on the sides and 5% on the back window. everything in the car is power and everything is in working condition. car is also full weight!
TSP heads cam ...................$2000
FAST 92/92.........................$1200
CONVO PRO'S.......................$1000
BMR SUS. ...........................$1200
FLT LVL4.............................$2400
YANK PT4000........................$800
PACESETTERS LT. ................$600
MAGNAFLOW & Y....................$600
SS HOOD .............................$700
SS SPOILER...........................$300
DYNO TUNE...........................$600
ET STREETS..........................$450
GM 373 GEARS.......................$285
UNDER DRIVE PULLIES..............$240
85MM LID..............................$135
85MM MAF............................$125
looking to get 12.5k for it.
if you have any questions you can pm me,call me or text me at 7134102880
It has Tsp heads cam package, cam being a (232/234 595/598),Fast 92-92 unported,85 mm lid & k-n filter,85 mm maff,Pacesetter long tubes & y-pipe,Maganaflow catback,FLT lvl4 trans with a Yank pt4000 converter,373 gears in the stock 10 bolt,Bmr adj suspension- t-arm,p-hard & lcas,Convo pro with littles up front & 27x10 et streets out back or i will let it go with 17' torque thrust with 11's in the rear on new mt 315 drag radials!
All mods on this car started @ 30000 miles & the car now has 37xxx miles on it,it Dynoed 407 RWHP & 380 TQ on a Mustang dyno. car has ran 11.08 @ 121 with a 1.48 60 foot 2nd time to the track full weight & N/A, the stock 10 bolt is howling pretty good & i have know idea how much longer it will last........car should run a high 10.90 now after the addition of the 85 mm lid & 85 mm maf & we pulled the front & rear impact bars to drop a little weight.
the car has 35% on the sides and 5% on the back window. everything in the car is power and everything is in working condition. car is also full weight!
TSP heads cam ...................$2000
FAST 92/92.........................$1200
CONVO PRO'S.......................$1000
BMR SUS. ...........................$1200
FLT LVL4.............................$2400
YANK PT4000........................$800
PACESETTERS LT. ................$600
MAGNAFLOW & Y....................$600
SS HOOD .............................$700
SS SPOILER...........................$300
DYNO TUNE...........................$600
ET STREETS..........................$450
GM 373 GEARS.......................$285
UNDER DRIVE PULLIES..............$240
85MM LID..............................$135
85MM MAF............................$125
looking to get 12.5k for it.
if you have any questions you can pm me,call me or text me at 7134102880
Thread
Thread Starter
Forum
Replies
Last Post
Gadgetized
GM Parts Classifieds
0
Jul 7, 2015 04:40 PM
gcsd3742
GM Parts Classifieds
0
Jul 6, 2015 05:22 PM
