1999 Cobra Termi swap Novi 2000 756 hp
#1
Thread Starter
Teching In
Joined: Feb 2012
Posts: 11
Likes: 0
From: Ruston LA
I have a 99 Cobra for sale.
99,xxx miles on the body. And about 20k on the build. Made 756hp and 660tq have dyno sheet some where from the previous owner. Previous owner said car ran a 9.6 @ 142 on 28in slicks
04 front bumper
Factory forged 04 engine, transmission, ecu swap.
LC-1 Wideband
Paxton novi 2000 18lb pulley/ 8 RIB setup
Aftermarket Belt Tensioner
Crower stage 3 blower cams and supporting valve train.
MMR 8 qt race oil pan.
BBK 65mm TB
Magnafuel protuner 750 10an fuel line 8an return
Kenne Bell boost-a-pump (not hooked up in mounted in trunk)
Stage 3 clutch n flywheel
Dyntech aluminum drive shaft
Solid axle swap with Posi 373 gears
Kenny brown suspension
Lake Wood front shocks
M&M Rear Coilovers
New Prothane UCA bushings
Full length weld in Sub frame connectors
BBK Headers, X pipe, mufflers ran out the back.
Tri Axe Shifter
UPR Quadrant
Steeda UCA
Tial BOV
BMPR 4 Inch intercooler
Brand new wheels and tires, (10th anniversary wheels, nitto tires, nitto drag radials on the back) car was just aligned
Tinted windows (all)
Carbon fiber interior accents, A/C, aftermarket radio, power everything, viper alarm. Black leather interior
Painted markers and tails.
Car was wet sanded and buffed 6-26-12
Located in North Louisiana
Asking $16,000 OBO
Condenser clutch just went out so the ac isn't working but I should have that fixed.
318 . 272.1838
Open to trades on anything really, nice bike plus cash, TBSS, GTO, Truck, etc
99,xxx miles on the body. And about 20k on the build. Made 756hp and 660tq have dyno sheet some where from the previous owner. Previous owner said car ran a 9.6 @ 142 on 28in slicks
04 front bumper
Factory forged 04 engine, transmission, ecu swap.
LC-1 Wideband
Paxton novi 2000 18lb pulley/ 8 RIB setup
Aftermarket Belt Tensioner
Crower stage 3 blower cams and supporting valve train.
MMR 8 qt race oil pan.
BBK 65mm TB
Magnafuel protuner 750 10an fuel line 8an return
Kenne Bell boost-a-pump (not hooked up in mounted in trunk)
Stage 3 clutch n flywheel
Dyntech aluminum drive shaft
Solid axle swap with Posi 373 gears
Kenny brown suspension
Lake Wood front shocks
M&M Rear Coilovers
New Prothane UCA bushings
Full length weld in Sub frame connectors
BBK Headers, X pipe, mufflers ran out the back.
Tri Axe Shifter
UPR Quadrant
Steeda UCA
Tial BOV
BMPR 4 Inch intercooler
Brand new wheels and tires, (10th anniversary wheels, nitto tires, nitto drag radials on the back) car was just aligned
Tinted windows (all)
Carbon fiber interior accents, A/C, aftermarket radio, power everything, viper alarm. Black leather interior
Painted markers and tails.
Car was wet sanded and buffed 6-26-12
Located in North Louisiana
Asking $16,000 OBO
Condenser clutch just went out so the ac isn't working but I should have that fixed.
318 . 272.1838
Open to trades on anything really, nice bike plus cash, TBSS, GTO, Truck, etc
Last edited by the_moo; Aug 5, 2013 at 10:24 AM.
#3
Thread Starter
Teching In
Joined: Feb 2012
Posts: 11
Likes: 0
From: Ruston LA
A dead cold start and full walk around.
http://www.youtube.com/watch?feature...&v=diXyWlJ30CY
<iframe width="560" height="315" src="//www.youtube.com/embed/diXyWlJ30CY" frameborder="0" allowfullscreen></iframe>
http://www.youtube.com/watch?feature...&v=diXyWlJ30CY
<iframe width="560" height="315" src="//www.youtube.com/embed/diXyWlJ30CY" frameborder="0" allowfullscreen></iframe>
Thread
Thread Starter
Forum
Replies
Last Post



















