all for a 30 spline, 8.6 truck 10 bolt...

I need a crush sleeve, a pinion nut, and some shims...


I have to tear my rear down and change the pinion yoke out (which I already have) and will need these things to go back together with... Let me know what you have out there... Thanks.

 

stealer ship . . . or Randy's Ring and Pinion

 

I figured someone would have this stuff laying around... I dont need a whole install kit with bearings and everything... just these couple parts.

 

Hey let me check when i get home.. i got some bearings and couple shim packs... one for pinion and one for the Diff...

 

Hey man, let me look, I should have a crush sleeve, pinion nut and a few new bearings, not sure about shims (I think I have the pinion shims) - send me a reminder Sunday (I'm leaving to be gone for the weekend) and I'll get that stuff together for you, just pay me freight and if you want throw in enough for a 6 pack

 

you da fu(kn man I'll hit you up this weekend then. Thanks alot bro. I could just reuse the shims that are in there but, I wanted to tighten it up some, its getting sloppy.

 

I'll be needing those shims if Nick doesnt have them. Let me know how much on them. We have a dyno day coming up on November 3rd... I was going to take it easy on her until I got it back to Tx from VA, but I almost cant resist the urge, I want to know what this cam makes on the hose