Heres a couple pics. of the twin turbos
#4
TECH Fanatic
Join Date: Mar 2002
Location: toronto
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
Looking Good very nice BLING factor there
Seems like I'm not the only one Going twins
Why did you go with that style of Exhaust housing rather than a t4 or round style ?
Are you going with an internal gate ?
So what type of headers are you going with ?Logs or tubular headers ?
I'm in the Process of Building a set of tubular headers for my setup
When are you shooting to be done by ?
Seems like I'm not the only one Going twins
Why did you go with that style of Exhaust housing rather than a t4 or round style ?
Are you going with an internal gate ?
So what type of headers are you going with ?Logs or tubular headers ?
I'm in the Process of Building a set of tubular headers for my setup
When are you shooting to be done by ?
#6
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Mar 2004
Location: NC
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 4.8T
that looks like a t3/t04r they have flanges that go over the whole side of the exhaust haousing covering up the internal wastegate port
then you can run normal waste gates.
then you can run normal waste gates.
Yeah they are a t3/to4r type turbo. I think innovative call them a Street Heat 60-1. www.innovativeturbo.com
#7
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Mar 2004
Location: NC
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
Heres a list of everthing I ordered so far.
2/ 60-1 innovative turbos
2/ Tial 38mm wastegates
1/ HKS BOV
Flanges
Couplers
Intercooler 30.5"-12"-3"
Clamps
Intercooler piping 3"
Elec. oil pump for turbos
and this is the stuff I still need to get
60# mototron injectors and clips
255 inline pump
exhaust piping and mufflers
2/ 60-1 innovative turbos
2/ Tial 38mm wastegates
1/ HKS BOV
Flanges
Couplers
Intercooler 30.5"-12"-3"
Clamps
Intercooler piping 3"
Elec. oil pump for turbos
and this is the stuff I still need to get
60# mototron injectors and clips
255 inline pump
exhaust piping and mufflers
Trending Topics
#9
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Mar 2004
Location: NC
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 4.8T
yeah them t3 turbines will spool quick as ****. i had thought about twins when i bought my t4/t04r but money wasn't there so are you doing a rear mount twin setup