Lingenfelter GT2-3, comp 7.4" pushrods, LS6 springs
Sep 18, 2010 | 03:58 PM
#1
Thread Starter
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Lingenfelter GT2-3, comp 7.4" pushrods, LS6 springs
http://i11.photobucket.com/albums/a1...1802Custom.jpg
http://i11.photobucket.com/albums/a1...1803Custom.jpg
http://i11.photobucket.com/albums/a1...1804Custom.jpg
GT2-3 is 207/220 .571/.578 118.5 A lot of guys here run this cam, and its a great blower cam. I have about 12k miles on it.
Pushrods are comp hardened high-tech 7.400", approx 12k miles
Springs are stock LS6 yellow springs, 12k miles.
Or I will do all 3 together for $330 plus shipping. This is a great deal if you are looking for a cam swap.
ALL SOLD!
http://i11.photobucket.com/albums/a1...1803Custom.jpg
http://i11.photobucket.com/albums/a1...1804Custom.jpg
GT2-3 is 207/220 .571/.578 118.5 A lot of guys here run this cam, and its a great blower cam. I have about 12k miles on it.
Pushrods are comp hardened high-tech 7.400", approx 12k miles
Springs are stock LS6 yellow springs, 12k miles.
Or I will do all 3 together for $330 plus shipping. This is a great deal if you are looking for a cam swap.
ALL SOLD!
Last edited by Atomic; Sep 19, 2010 at 07:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
murderedSS
Tuning, Diagnostics, Electronics, and Wiring
27
Oct 12, 2015 11:13 AM
jtphelps289
GM Parts Classifieds
18
Sep 29, 2015 12:00 PM
53, 74, cam, comp, gt23, lingenfelter, lingfelter, ls1tech, ls6, push, pushrods, rods, springs, tuscaloosa
