Torque specs Cometic gaskets, ARP studs, 20W50 oil
#1
Torque specs Cometic gaskets, ARP studs, 20W50 oil
IIRC Cometic or ARP says to torque the head studs down to like 75 lb-ft using their moly lube. I know you guys recommend an extra 15 lb-ft to help the Cometics seal up better, and ARP recommends a few extra lb-ft when using oil instead of moly lube.
I'm going to be sealing the Cometics up for the 3rd time this weekend with my ARP studs and 20W50 oil. What do you guys recommend that I torque them to?
I'm going to be sealing the Cometics up for the 3rd time this weekend with my ARP studs and 20W50 oil. What do you guys recommend that I torque them to?
#3
On The Tree
Join Date: Dec 2006
Location: So. calif.
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Specs
Originally Posted by thunder550
IIRC Cometic or ARP says to torque the head studs down to like 75 lb-ft using their moly lube. I know you guys recommend an extra 15 lb-ft to help the Cometics seal up better, and ARP recommends a few extra lb-ft when using oil instead of moly lube.
I'm going to be sealing the Cometics up for the 3rd time this weekend with my ARP studs and 20W50 oil. What do you guys recommend that I torque them to?
I'm going to be sealing the Cometics up for the 3rd time this weekend with my ARP studs and 20W50 oil. What do you guys recommend that I torque them to?
Thread
Thread Starter
Forum
Replies
Last Post
slowlsx
GM Parts Classifieds
2
08-10-2015 05:33 PM