GM Parts Classifieds For Sale and Wanted

Bunch of parts for sale, left overs from Blown06 build

Thread Tools
 
Search this Thread
 
Old Jul 11, 2010 | 09:54 PM
  #1  
Blown06's Avatar
Thread Starter
8 Second Truck Club
iTrader: (32)
 
Joined: Apr 2006
Posts: 5,662
Likes: 47
Default Bunch of parts for sale, left overs from Blown06 build

Pics can be sent upon request. I'll probably hold on to most of this stuff for a few weeks, but if it does not sell its going in the trash. I don't have room for it. If you see something you want and the price is too high, make an offer and I'll probably take it.

4l80e conversion crossmember: Modified factory 3/4 ton crossmember. Local pickup only. $45


Sliding Glass Rear Window: I called around to see what this window is worth and was told by two places that this window is actually very rare. Made by GM, however only installed as a dealer item. New cost is $1200. Local pick up only. $350



Complete A/C and Heating system (under the dash): Local pick up only. $30


Set of 4 16" Tahoe Wheels: No center caps, no road rash or scratches. Buyer pays shipping. $45


Stock external trans cooler: No lines. Buyer pays shipping. $30


Leafsprings with clamps: Local pick up only, or if you just want the shackles I can do that. $30


Alternator/Power Steering Bracket: Fairly new, only has about 15 miles on it, bought new from dealership, buy pays shipping. $35



Rack & Pinion: Has 20k miles on it. Local pick up only. $100


Brake Booster and Master Cylinder: 20k miles, buyer pays shipping. $30

Windshield Wiper assembly: Complete assembly with mounting bracket, motor and arms. Local pick up only. $10

Last edited by Blown06; Jul 14, 2010 at 02:33 PM.
Reply
Old Jul 11, 2010 | 10:12 PM
  #2  
07rcsb's Avatar
Teching In
iTrader: (1)
 
Joined: Sep 2008
Posts: 17
Likes: 0
From: g.b.n.l / pasadena tx
Default

were u located ?
Reply
Old Jul 12, 2010 | 12:17 AM
  #3  
Blown06's Avatar
Thread Starter
8 Second Truck Club
iTrader: (32)
 
Joined: Apr 2006
Posts: 5,662
Likes: 47
Default

Pearland Texas

I've also added the flip kit for the rear.
Reply
Old Jul 12, 2010 | 01:01 AM
  #4  
xx_ED_xx's Avatar
TECH Addict
iTrader: (17)
 
Joined: Jun 2007
Posts: 2,229
Likes: 1
Default

Now I am no shock expert, but are yours double adjustable?
Reply
Old Jul 12, 2010 | 01:08 AM
  #5  
02'Z71ONDUBZ''s Avatar
TECH Resident
iTrader: (8)
 
Joined: Feb 2009
Posts: 797
Likes: 0
From: Tahlequah/Norman, OK
Default

What is the crossmember for? 4WD?
Reply
Old Jul 12, 2010 | 02:48 AM
  #6  
LS1TRUCKGUY's Avatar
TECH Addict
iTrader: (7)
 
Joined: Nov 2005
Posts: 2,452
Likes: 2
From: Deer Park Texas
Default

Pm sent on the pillar pod.
Reply
Old Jul 12, 2010 | 04:09 AM
  #7  
dry_kill's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Sep 2005
Posts: 1,777
Likes: 0
From: houston tx
Default

so the rear flip kit comes with everything to do a 6" rear drop except the c-notch?
Reply
Old Jul 12, 2010 | 05:09 AM
  #8  
dry_kill's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Sep 2005
Posts: 1,777
Likes: 0
From: houston tx
Default

and do you have any pics of the kit?
Reply
Old Jul 12, 2010 | 10:42 AM
  #9  
Blown06's Avatar
Thread Starter
8 Second Truck Club
iTrader: (32)
 
Joined: Apr 2006
Posts: 5,662
Likes: 47
Default

Originally Posted by xx_ED_xx
Now I am no shock expert, but are yours double adjustable?
They are singles

Originally Posted by 02'Z71ONDUBZ'
What is the crossmember for? 4WD?
It was purchased as a 2wd, 3/4 ton crossmember for 4l80e. I had to cut the mounting pad off, move it and reweld it back on. It bolts to the bottom of the frame rail.

Originally Posted by LS1TRUCKGUY
Pm sent on the pillar pod.
Replied

Originally Posted by dry_kill
so the rear flip kit comes with everything to do a 6" rear drop except the c-notch?
Yes. U-bolts, washers, nuts, plates and stands

Originally Posted by dry_kill
and do you have any pics of the kit?
I've gotten several requests for pics. I'm going to update the original post with pics today.
Reply
Old Jul 12, 2010 | 12:09 PM
  #10  
candless's Avatar
Teching In
iTrader: (17)
 
Joined: Feb 2010
Posts: 21
Likes: 0
From: Wattsburg, Pa
Default

*very* interested in the rims...could you weigh one and reply with weight/zip
thx. Eric
Reply



All times are GMT -5. The time now is 02:09 AM.