btr stage 3 cam?
#32
Staging Lane
iTrader: (4)
Join Date: Apr 2011
Location: Fort Worth, TX
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
It may be a while before I strap it to a dyno. When I was researching which cam to go with, I was able to find this. -see the link-
GM EFI Magazine
This was the only article I could find that had a graph or even mentioned what kind of power this cam made.
GM EFI Magazine
This was the only article I could find that had a graph or even mentioned what kind of power this cam made.
#33
TECH Senior Member
iTrader: (79)
It may be a while before I strap it to a dyno. When I was researching which cam to go with, I was able to find this. -see the link-
GM EFI Magazine
This was the only article I could find that had a graph or even mentioned what kind of power this cam made.
GM EFI Magazine
This was the only article I could find that had a graph or even mentioned what kind of power this cam made.
The following users liked this post:
99silverado420 (09-07-2019)
#37
On The Tree
iTrader: (7)
Join Date: Nov 2006
Location: Sumter, SC
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Well this is not exactly the same application but I'll be installing one of BTR's cams in a LS2 GTO A4 next week. Pretty much a bare bones drop-in type of cam. The baseline Dyno will be this Saturday and once the tune is sorted out I will re-visit the same Dyno. The only two mods will be the BTR Stage III truck cam and an UDP. We shall see how she does.
#38
TECH Resident
I would like to see those #'s. My old 2005 gto M6 with headers, CAI, Corsa catback exhaust, 160 stat and a tune did 365 to the wheels. I ran a 12.45 at 114 at englishtown on a nice day.
#40
On The Tree
iTrader: (7)
Join Date: Nov 2006
Location: Sumter, SC
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I haven't got the Dyno sheets e-mailed to me yet, but the best run was 396/384. The first run was 377, second run after a cool down was 396 and a 'hot lap' on the dyno resulted in 385 I think.
Seems like a happy dyno to me but all I want is a baseline for the comparison between cam and no cam. I attached the logs from my AutoCal (2nd and 3rd runs) if anyone wants to check them out.
Thanks to Ryan @ GPI, he is my tuner.
Seems like a happy dyno to me but all I want is a baseline for the comparison between cam and no cam. I attached the logs from my AutoCal (2nd and 3rd runs) if anyone wants to check them out.
Thanks to Ryan @ GPI, he is my tuner.