P1810 Trans Press. Switch Malfunction
#1
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: Anderson, TX
Posts: 2,775
Likes: 0
Received 0 Likes
on
0 Posts
P1810 Trans Press. Switch Malfunction
I pulled this code off of my 2003 Tahoe. Can anyone explain what this means? How to go about fixing it?
Could it be related to this problem I am still having?
https://www.performancetrucks.net/fo...d.php?t=420836
Thanks,
Could it be related to this problem I am still having?
https://www.performancetrucks.net/fo...d.php?t=420836
Thanks,
#2
formerly 1BADC10 (12/14/2011)
iTrader: (2)
Join Date: Aug 2005
Location: TX
Posts: 2,135
Likes: 0
Received 0 Likes
on
0 Posts
Could be loose connection or faulty pressure switch (if that's the ONLY code actively reported).
Drain fluid / drop pan
Check connection on switch
Unplug & reseat connector
Reinstall pan
Add required amount of fluid (non-synthetic)
Clear code
Start vehicle & see if code reappears.
If code reappears, possible bad switch. Same procedure, but just replace switch (5 bolts securing in place).
*edit*
may/may not be worth it to replace switch since you'll already have the pan dropped. check on pricing.
Drain fluid / drop pan
Check connection on switch
Unplug & reseat connector
Reinstall pan
Add required amount of fluid (non-synthetic)
Clear code
Start vehicle & see if code reappears.
If code reappears, possible bad switch. Same procedure, but just replace switch (5 bolts securing in place).
*edit*
may/may not be worth it to replace switch since you'll already have the pan dropped. check on pricing.
#6
11 Second Truck Club
iTrader: (37)
found this today...not sure what tranny you have:
Condition/Concern:
A 4L80E may intermittently set DTC P1810 and exhibit harsh shifts. Freeze frame/ fail records may show the vehicle was in reverse and the P1810 set shortly after a cold start. The vehicle may also have not been started for an extended period of time.
Recommendation/Instructions:
This condition may be inadvertently induced by starting the vehicle and immediately shifting the transmission into a drive range or reverse. If the PCM does not see a PRND43 input from the transmission fluid pressure switch before the customer shifts into a drive range or reverse, the PCM will assume the TFP is malfunctioning because the PCM did receive a signal from the PRND43 switch and set the code P1810. This condition would occur more easily if the vehicle has not been started for an extended period of time because of torque converter drain back. DTC P1810 does not turn on the MIL the first failure, but does store the code and it commands maximum line pressure. The customer will probably notice only the harsh shift.
Currently, there is no fix for this condition. The dealer can advise the customer to start the vehicle and allow it to run for a few seconds before selecting reverse or selecting D4 before reverse.
A 4L80E may intermittently set DTC P1810 and exhibit harsh shifts. Freeze frame/ fail records may show the vehicle was in reverse and the P1810 set shortly after a cold start. The vehicle may also have not been started for an extended period of time.
Recommendation/Instructions:
This condition may be inadvertently induced by starting the vehicle and immediately shifting the transmission into a drive range or reverse. If the PCM does not see a PRND43 input from the transmission fluid pressure switch before the customer shifts into a drive range or reverse, the PCM will assume the TFP is malfunctioning because the PCM did receive a signal from the PRND43 switch and set the code P1810. This condition would occur more easily if the vehicle has not been started for an extended period of time because of torque converter drain back. DTC P1810 does not turn on the MIL the first failure, but does store the code and it commands maximum line pressure. The customer will probably notice only the harsh shift.
Currently, there is no fix for this condition. The dealer can advise the customer to start the vehicle and allow it to run for a few seconds before selecting reverse or selecting D4 before reverse.
#7
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: Anderson, TX
Posts: 2,775
Likes: 0
Received 0 Likes
on
0 Posts
Interesting... I have a 4L60e in the Tahoe. The wife probably is the culprit for throwing it in gear as she starts the truck. I haven't seen a code since the original post.
Thread
Thread Starter
Forum
Replies
Last Post
grantpo
GM Drivetrain & Suspension
1
07-15-2015 12:21 PM
Blackrat48
GM Engine & Exhaust Performance
5
07-12-2015 07:28 PM