BBS RW 18s with tires cheap.
#1
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Aug 2005
Posts: 669
Likes: 0
From: Odessa, Texas
Disclaimer: These wheels are slightly damaged. Let's get that out of the way right up front. I went with Centerlien 22s and these are just taking up space in my parents garage. I intended to do a little DIY wheel repair and run drag radials on them but I've come to realize I'll probably never get around to it. The wheels have minor curb rash, one is very slightly bent (no one has ever noticed) and one has a scratch on one of the spokes. They have Nittos 255/55/18 420S tires mounted on them. Two tires have maybe 40% tread left and the other two are pretty well bald. Lug nuts included. I seriously doubt anyone would want to mess with shipping these but I'll say it anyway. I want to sell them locally, If someone is serious I'll meet up within a reasonable distance.
$100? OBO.
I'll post a picture of the worst wheel. Look at about 9 o clock on to see the bend:

If you're willing to put in some blood, sweat and tears these could be decent wheels on the cheap. You'll need to strip the paint off, sand the curb rash down, fill the curb rash with something like Bondo, sand some more, primer and paint the wheels.
$100? OBO.
I'll post a picture of the worst wheel. Look at about 9 o clock on to see the bend:

If you're willing to put in some blood, sweat and tears these could be decent wheels on the cheap. You'll need to strip the paint off, sand the curb rash down, fill the curb rash with something like Bondo, sand some more, primer and paint the wheels.
#3
Let me know when you have time and I'll stop by and take a look at them. Will most likely take them. I was going to use denali 17s but 18's have more tire choices.
Last edited by tarinitup; Sep 26, 2008 at 07:24 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




Maybe I can get back to street racing with traction

