combos to run 12's.

Thread Tools
 
Search this Thread
 
Old Mar 13, 2008 | 10:10 PM
  #1  
Thread Starter
TECH Apprentice
iTrader: (7)
 
Joined: Apr 2005
Posts: 309
Likes: 0
From: HOUSTON TEXAS
Question combos to run 12's.

what are some known power combos to get a 02 lightning into the 12's.
I was looking at rpm outlet's performance pack, K&n intake, sct tuner, intake plenum,throttle body, plugs, wires, thermostate, and 6lb pulley. when I run I'll be using et streets.
Reply
Old Mar 18, 2008 | 02:36 PM
  #2  
1QUICKBOLT's Avatar
Teching In
 
Joined: Sep 2007
Posts: 22
Likes: 0
From: TN
Default

You may get your 12 second run with that. Ported eaton,long bars,dyno tune and you'll have a better chance.
Reply
Old Mar 18, 2008 | 04:39 PM
  #3  
wd13's Avatar
Teching In
 
Joined: Jul 2007
Posts: 22
Likes: 0
From: Eugene, MO
Default

I ran 12's with just a 6lbr, tune, plugs, DR's, K&N with bottom cut out of stock airbox. Loose the hitch and spare.

BTW, I wouldn't buy anything from RPM outlet. I tried and all I got was grief for my $$
Reply
Old Mar 19, 2008 | 09:35 PM
  #4  
Thread Starter
TECH Apprentice
iTrader: (7)
 
Joined: Apr 2005
Posts: 309
Likes: 0
From: HOUSTON TEXAS
Red face

thanks guys..was about time I got some little idea.. there isn't that much traffic on here I guess.
Reply
Old Mar 19, 2008 | 09:58 PM
  #5  
RandomHero's Avatar
TECH Veteran
iTrader: (24)
 
Joined: Jun 2005
Posts: 4,787
Likes: 1
From: Austin,TX Name:Mark
Default

Originally Posted by dameter21
thanks guys..was about time I got some little idea.. there isn't that much traffic on here I guess.
Nah this is mostly a chevy site. You'll never find a ford or dodge guy that isn't welcomed(by most at least), but it's predominantly a chevy based site.
Reply
Old Mar 24, 2008 | 11:51 AM
  #6  
OrgasmicSVT's Avatar
Teching In
 
Joined: Oct 2007
Posts: 4
Likes: 0
Default

4lb lower pulley
CAI intake
Tune
Lakewood Traction Bars
Nitto DRs

12.9X and I'm a larger guy so w/ a smaller driver I would expect a 12.7
Reply
Old Mar 29, 2008 | 08:33 PM
  #7  
Thread Starter
TECH Apprentice
iTrader: (7)
 
Joined: Apr 2005
Posts: 309
Likes: 0
From: HOUSTON TEXAS
Smile

lol larger guy, I guess were in the same boat then. lol..
Reply
Old Mar 31, 2008 | 11:26 PM
  #8  
dinogt's Avatar
Staging Lane
 
Joined: Feb 2006
Posts: 91
Likes: 0
From: houston-ish, tx
Default

i went 13.03 @ 104 with just a cold air and a catback, on street tires with no traction device, but it seems i own a freak.

the general setup is 4 pound or more pulley, tune, cold air, and a catback on a drag radial is good for mid-high 12's
Reply
Old Jun 1, 2008 | 05:23 PM
  #9  
FL1034's Avatar
Teching In
 
Joined: May 2008
Posts: 1
Likes: 0
From: Coffeyville Kansas
Default

I'm in the large guy category. Stock i ran a 14 Flat on street tires, my buddy whos fairly smaller than i am was able to pull a 13.6.
I've slapped a set of Pacesetter long tube headers and new exhaust on my L, but have not had the chance to re-run at the local track.
Whats the best place to go for Lightning accessories and aftermarket parts?
Their is barely anything to my knowledge aside from ebay.
Reply
Old Jun 1, 2008 | 10:35 PM
  #10  
203Cree's Avatar
TECH Addict
 
Joined: Jul 2005
Posts: 2,515
Likes: 0
From: Olathe, KS
Default

Originally Posted by FL1034
I'm in the large guy category. Stock i ran a 14 Flat on street tires, my buddy whos fairly smaller than i am was able to pull a 13.6.
I've slapped a set of Pacesetter long tube headers and new exhaust on my L, but have not had the chance to re-run at the local track.
Whats the best place to go for Lightning accessories and aftermarket parts?
Their is barely anything to my knowledge aside from ebay.
Lightning Force Performance, Johnny Lightning Performance, Woodbine Motor Sports, Dante's Modular Performance, Power Surge Performance, JDM Engineering, D'Agostino Racing, Amazon Tuning Solutions, and Developmental Racing.

I think that about covers it. If you can't find what you need from one of them, they probably don't make it.
Reply



All times are GMT -5. The time now is 07:17 PM.