When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Full back half 4-link
Hidden cage with bed cover
18gal Fuel Cell
MagnaFuel 625 Pump direct 10AN feed off tank
Full 10AN fuel lines with Aeromotive EFI in-line filter and 8AN return
Narrowed D60 4.10 gear 35 spline axles full spool all Moser parts with billet pinion yoke
Double adjustable QA1 coil overs front and rear
Spohn Upper/Lower Control Arms
Belltech drop spindles
Wilwood brakes front and rear with line lock and proportioning valve
Hydratech hydroboost with Wilwood Master and PS resorvoir with custom HD lines
Smoothed firewall
B&M Quarter Stick Shifer
Custom 3 row radiator with custom expansion tank with lines for LS steam ports 3AN
PLX Wideband
PLX EGT
PLX Boost
Racepak UDX-SR Dash with OBD2 Module
Pioneer head unit
Complete new custom wiring harness with fuse block under dash. Has circuits for power windows, AC, etc.
Smoothed front bumper
Smoothed wiper cowl (wiper delete)
Harwood 4” Cowl hood lift off with Quik Latch pins
New carpet inside - needs trim in a few spots depending on final dash layout
Kirkey Big Boy seats with 5 point harnesses
New windshield
New rear glass with middle sliding window
Custom inner fenders
Dual Moroso catch cans
SPAL Dual Fans (not pictured) included
Custom Strange Engineering driveshaft with 1350 U joints, billet 4L80 Yoke
Aftermarket steering column with Grant steering wheel
Custom solid steering shaft with billet U joints
Solid LS motor mounts with matching 4L80E trans mount from BRP Hotrods
B&M Trans Cooler with 6AN lines
Ceramic coated LS headers
15x10 Steel Wheels
MT Sportsman SR 29x15R15
Chassis work was done by Garrett at OddBall. The truck is pretty light with all the weight reduction and made for a fun street car. Never got to run it at the track but it was nice and straight on the street.
I know I’m missing some things here. Will come with spares and extras parts that I don’t need anymore. Nitrous kit, methanol pump, springs, fuel lines, fittings, etc.
Right now it's pretty dusty as it's just been sitting inside my shop since the baby has been born.
Looking for 10,000 obo - Like many other builds that go up for sale I have way more in it than selling. Right now as it sits there is over $20,000 invested. Will sell motor/trans/converter for additional cost.
NOTE : DOES NOT COME WITH MOTOR/TRANS/CONVERTER, SOLD AS A ROLLER. PICTURES WITH MOTOR ARE ONLY TO SHOW CLEARANCES AND TO SHOW IT IS LSX READY.
After more than 3yrs, I am sure it already found a home
You both suck at reading dates
na not really, as it doesn’t list sold,and I’ve found cars two yrs and not sold,but if the mods would bother to take the time to delete every post that’s over a yr old or set it up to auto delete since all these sellers are too lazy to either post sold or delete it themselves it would clean up the site and make it function better...
plus the ad is also listed by the seller 1-2021 ????? So maybe ya can’t see the dates ...
Last edited by Slammedturbos; 06-03-2021 at 04:35 PM.
na not really, as it doesn’t list sold,and I’ve found cars two yrs and not sold,but if the mods would bother to take the time to delete every post that’s over a yr old or set it up to auto delete since all these sellers are too lazy to either post sold or delete it themselves it would clean up the site and make it function better...
plus the ad is also listed by the seller 1-2021 ????? So maybe ya can’t see the dates ...
If you're gonna be a dick head, at least be correct about it
If you're gonna be a dick head, at least be correct about it
yeah I believe your correct when I went to look it again ,it pops up all the recent pics from ads I’ve looked at and a date from another truck popped up which was also a older s10, with a ls build making me think it got listed again...my bad ..
03-27-2018, 05:10 PM
Pro Street S10 Roller 1,000+hp LSx Ready
..
