Trucks and SUV Classifieds All Makes and Models ONLY Trucks and SUV's

99 Silverado 1500 ecsb 6.0/80e/full air ride

Thread Tools
 
Search this Thread
 
Old 09-23-2017, 08:51 PM
  #1  
Launching!
Thread Starter
iTrader: (1)
 
TheBeeblebrox's Avatar
 
Join Date: Jun 2012
Location: Southern California
Posts: 212
Likes: 0
Received 2 Likes on 2 Posts
Default 99 Silverado 1500 ecsb 6.0/80e/full air ride

I think it's time to sell the truck, I hardly drive it anymore and I'm looking to pick up a cts-v wagon.

$6k

I'm located in Santa Clarita CA, truck passed SMOG recently and registration is good through next year.

On to the truck, it has 276k on the body just under 7k on the LQ4 rebuild and just over 5k on a Jake's stage 2 4L80e and about 500 miles on a new Circle D 275mm 2600 rpm converter, tru-cool 40k.

Suspension is a full RideTech air bag set-up, ShockWaves up front w/upper and lower control arms, 4-link w/pan-hard bar out back, kit also has the upgraded 5 gal tank and two compressors, I have only put about 700 miles on this set up.

Belltech 2” drop spindles

HD swap w/stock 1500 hood

Wheels are 20x9 American Racing Circuit w/Nitto Invo 255/45r20

Brakes are Hawk pads and EBC(front)/Hawk(rear)rotors, new stainless braided lines from Goodridge and ATE fluid.

Converted to Hydroboost earlier in the year, new p/s pump and lines, LKQ hydroboost unit w/new o-rings.

Repainted the hood, roof, and the tonneau cover 2 years ago, however the top of the doors/cab have started to fade recently, and the truck has various scratches and what not, its not perfect - see pics.

The engine was a 2002 LQ4 (~145k) I got off a member here that I had rebuilt, cleaned up the cylinder walls (went .005" over), stock crank was polished, new King bearings throughout the motor (including the cam bearings), forged I-beam rods, and forged flat-top pistons (~10:1 comp.), stock 317 heads cnc valve job, trunnion upgraded rockers, LS6 valve springs, LS2 timing chain/gear, LS7 lifters, BTR High Volume oil pump. All built and dyno tuned by RPM Motors (317hp 362ft-lbs at the wheels -have dyno sheet).

34” radiator w/06’ electric fans

Its an LT, so heated leather seats (the drivers seat is torn)

I have a car cover for it and most of the stock components to go with the truck if desired.

The truck has been in the family since new, I have the title in hand, and can get a CarFax as well.

I'm probably forgetting some things so any questions feel free to ask

Full album of pics here :Truck - Album on Imgur







































Old 09-24-2017, 01:41 AM
  #2  
Launching!
iTrader: (1)
 
settlemoore's Avatar
 
Join Date: Nov 2011
Location: Bowie, MD
Posts: 280
Likes: 0
Received 38 Likes on 24 Posts
Default

Way too cheap. Unless I missed something lol
Old 09-24-2017, 01:30 PM
  #3  
Launching!
Thread Starter
iTrader: (1)
 
TheBeeblebrox's Avatar
 
Join Date: Jun 2012
Location: Southern California
Posts: 212
Likes: 0
Received 2 Likes on 2 Posts
Default

Yea if someone wants to offer more, I won't say no, however I want it to sell quickly
Old 09-24-2017, 04:02 PM
  #4  
Launching!
Thread Starter
iTrader: (1)
 
TheBeeblebrox's Avatar
 
Join Date: Jun 2012
Location: Southern California
Posts: 212
Likes: 0
Received 2 Likes on 2 Posts
Default

Sale pending
Old 09-26-2017, 09:31 PM
  #5  
Teching In
 
bullittjoe's Avatar
 
Join Date: May 2013
Location: Frisco Tx
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

That's a hell of a deal....

If you where in Texas I would have jumped all over it!
Old 10-02-2017, 12:32 AM
  #6  
Registered User
 
azrider09's Avatar
 
Join Date: Oct 2017
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

Is the truck sold?
Old 10-02-2017, 12:54 AM
  #7  
Launching!
Thread Starter
iTrader: (1)
 
TheBeeblebrox's Avatar
 
Join Date: Jun 2012
Location: Southern California
Posts: 212
Likes: 0
Received 2 Likes on 2 Posts
Default

Yes, just awaiting pickup.



All times are GMT -5. The time now is 01:25 AM.