1993 S10 - LS / 4L65 swap
 

Looking to get rid of the S10 and get into a 99-02 RCSB or 06+TBSS. I've had the truck for right around a year and put about 15,000 trouble free miles on it.

It's a 93 S10 with 147K original miles on the body and was garage kept most it's life. Original paint still shines up very nice but does have small scratches and chips from over the years. The swap was done correctly with just about all brand new parts. Motor is about the only thing that was used when installed and is a 5.3 pull out with a stock LS1 F-body cam. Wiring harness was bought brand new from Current Performance and works with the factory body harness so that all factory gauges work like they should. Motor has LS6 intake, 28# injectors and Spectre intake. Exhuast is through Sanderson shorty headers, and Heartthrob true duals (I also have a set of brand new BRP ceramic coated midlength and longtube in-frame headers that I never installed). All accessories and radiator are brand new GM and a combination of F-body and Corvette. The trans is a 4L65 that was bought brand new from Nook and Tranny and has the deep pan and a Lokar dipstick. Rear end is a 3.73 with limited slip and a Moser aluminum girdle. Diff and trans fluids were recently replaced with Royal Purple and oil has been changed every 2,500 - 3,000 miles with Pennzoil Ultra synthetic and PF48 Delco filter. Bucket seats, console and floor shifter have been swapped out of a 98 Blazer...they are very clean and look factory correct. I recently replaced all the door latch and locking internals on the driver side door. Truck also will come with a snap on bed cover but I took it off as I use the bed regularly.

RPM tuned the truck and it put down close to 300rwhp and 310rwhp. Very good torque curve and pretty good numbers considering the lack of a cam and just shorty headers. Torque is over 285rwtq across the board from 2300-5300rpm.

I love the truck and drive it daily but just need something bigger. Truck drives straight and has no steering issues but I'm pretty picky and bought all new Moog tie rods, adjusters, center link, pitman arm and front springs for the truck that have not yet been installed. All these parts will be included.

Looking to get $8,000 OBO cash or trade towards a 99-02 RCSB or 06+TBSS. I've been looking around and really think this is one of the cleanest S10 swaps out there in this price range.

Thanks-
Rick

Have to be a member over there to view the pics... Post them here.

Finally got some pics up.

Monday bump. Pricing is negotiable.

Nice S10... trade the s10 in my sig plus some cash? haha

Not really looking for another S10 but I guess it would all depend on how much cash.

Does it have A/C?

Sorry forgot to update the ad. Truck is gone.