AFP Coilover Brackets, Tuning, and Custom Tanks
12-03-2016, 03:17 PM
#14
Truck Sponsor
Thread Starter
Hey, they were going to spam folder for some reason, although I only see one. Either way I will get an email to your shortly and get you taken care of!
For anyone else having trouble, feel free to contact me directly at atomicFandP@gmail.com
For anyone else having trouble, feel free to contact me directly at atomicFandP@gmail.com
12-13-2016, 02:54 PM
#15
Truck Sponsor
Thread Starter
Just a reminder I have 10% off anything from my website that is valid through the end of the year, code AFP2016 at checkout!
I have been working on a few other things I think you guys will like and I should have something to show at the end of the week!
I have been working on a few other things I think you guys will like and I should have something to show at the end of the week!
12-20-2016, 02:41 PM
#20
Truck Sponsor
Thread Starter
I haven't thought about Tshirts, but I will look into it!
So this is the main thing I have been working on lately, bolt-in seat mounts for corbeau seats in these trucks with harness mounting points. Other brands may also work if they share the corbeau mounting pattern or something similar. Corbeau does not make a kit for these trucks so most people modify the factory mount with angle iron or the like to put in race seats. My mounts have multiple positions to mount the seats with about 3" front to back adjustment and 1.5" left or right adjustment. They are not on rails, so the seat is fixed once you get it where you want it. There is about a 7 degree recline (same as factory). They are 3/16" steel with gussets for strength and weigh about 13lb each. They will be strong enough to mount a 4 or 5 point harness to for those guys that don't have a cage but want an easy way to mount aftermarket seats and harnesses. This is not a replacement for a real cage!
The picture is my first prototype in my truck to check fitment and the solidworks picture is my revised version that pulls it in tighter with a smaller footprint and drops about 5lbs per side. The mounting patterns are different left to right so that was fun.
These will be offered in driver side only as well as driver+passenger kits, raw or powdercoated if I can fit it in my oven without the wife throwing a fit
Still working on pricing. I should have version2 in my hands in a week or so.
So this is the main thing I have been working on lately, bolt-in seat mounts for corbeau seats in these trucks with harness mounting points. Other brands may also work if they share the corbeau mounting pattern or something similar. Corbeau does not make a kit for these trucks so most people modify the factory mount with angle iron or the like to put in race seats. My mounts have multiple positions to mount the seats with about 3" front to back adjustment and 1.5" left or right adjustment. They are not on rails, so the seat is fixed once you get it where you want it. There is about a 7 degree recline (same as factory). They are 3/16" steel with gussets for strength and weigh about 13lb each. They will be strong enough to mount a 4 or 5 point harness to for those guys that don't have a cage but want an easy way to mount aftermarket seats and harnesses. This is not a replacement for a real cage!
The picture is my first prototype in my truck to check fitment and the solidworks picture is my revised version that pulls it in tighter with a smaller footprint and drops about 5lbs per side. The mounting patterns are different left to right so that was fun.
These will be offered in driver side only as well as driver+passenger kits, raw or powdercoated if I can fit it in my oven without the wife throwing a fit
Still working on pricing. I should have version2 in my hands in a week or so.
