Input on my setup. Hci 6.0
#1
Input on my setup. Hci 6.0
Here’s some info on the truck
1994 Silverado ScSb
Lq4 .30 over SBE besides some Arp rod bolts
built 80e, 3600 Circle D SC.
4:30 gear.
4,320 with driver.
Im currently getting parts together to HCI the truck and would like some input on what to expect as far as power goes.
custom grind
232/244 - 627/627 on a 111Lsa.
823 heads
FAST LSXRT 102.
Truck still has a factory style dished piston.
And I would like to Mill the heads to get this set up around 10.5.1 compression. But being the cam is the size it is I’m most likely looking at fly cutting my stock pistons.
Just looking for some input. Leave some Hp and 1/4mile guesses. Pic of the truck attached.
1994 Silverado ScSb
Lq4 .30 over SBE besides some Arp rod bolts
built 80e, 3600 Circle D SC.
4:30 gear.
4,320 with driver.
Im currently getting parts together to HCI the truck and would like some input on what to expect as far as power goes.
custom grind
232/244 - 627/627 on a 111Lsa.
823 heads
FAST LSXRT 102.
Truck still has a factory style dished piston.
And I would like to Mill the heads to get this set up around 10.5.1 compression. But being the cam is the size it is I’m most likely looking at fly cutting my stock pistons.
Just looking for some input. Leave some Hp and 1/4mile guesses. Pic of the truck attached.
#3
midwest, pump gas, I’m going to mill the heads as much as I can to bump the compression.
Thread
Thread Starter
Forum
Replies
Last Post
Speeds8erM-1
MULTIMEDIA (truck related)
3
11-23-2008 06:05 PM
Speeds8erM-1
MULTIMEDIA (truck related)
1
08-11-2008 05:23 PM