I’ve been collecting some SS parts for a long time but now I decided to go a different route with my truck.

So I’m letting go of OEM SS cladding. All the parts are off an 03 SS VICTORY RED Silverado.

Some parts are scuffed/ scratched and one right rear bed cladding is cracked but nothing that can’t be fixed.

So all the cladding that I have is in the pictures including the rear bumper. I don’t have all the cladding but most of it is there and it’s oem.

Im asking $450.00 for everything, Will ship via greyhound do to the size of the items. I’m located in Salt Lake City Utah.

Buyer pays for shipping and PayPal fees.

Thanks.

 

Wish you where closer

 

 

Do your thing, but it wouldn't cost much if you wrap em in bubble wrap and wrap cardboard around them. I would think Greyhound shipping, or Uship.com would be reasonable shipping charges. Just seems like you are in a remote location to not want to ship this, but good luck.

 

 

I wonder how much shipping would be

 

If OP can give you a better idea on the dimensions it will help. I think UPS has a certain total number of inches before you have to do freight or it jumps in price. I put in SLC to SATX 12x14x66" for 15lbs, ground was 3 days for $100.24 (and that was up to 67lbs). That seems reasonable. I have shipped transmissions for only a little more than that in just a box with a couple of bands.

If it was me, I would see if what the length is on the one long side skirt, and if it will fit in a Uhaul big box. Or go to a Walmart, or grocery store and see if they can hold a big sheet or box for you. Take dated pictures before. Wrap em in bubble wrap, (probably $30 in materials), cut the long corner of the box, and fold it over for a tighter fit. Band it if you can, or even a half roll of duct tape if needed. I would think it would add somewhere between $30-$50 for packaging it up nice and secure.

I have no idea if that's a good price, but I always feel like you shouldn't talk people down if you are asking them to go out of their way. $50 more for packing it, and $100 for shipping. Looks like about $600 to me. I'm staying out of this thread now.

 

I know this post is like 3 years old but do you still have these parts?

 

I am going to say no... good luck getting a response hasn't been back in a while....