GMT K2xx Trucks General Discussion 2014+ Trucks | General Discussion

Procharger installed

Thread Tools
 
Search this Thread
 
Old Apr 21, 2017 | 08:17 PM
  #11  
FELONIOUS1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2016
Posts: 83
Likes: 5
From: DFW TX
Default

Damn man that's super cheap, how'd you manage that? I stole my setup brand new for $3500 with a pair of pacesetter ceramic coated long tubes so I'm really not in it for much more. I'm really not happy with the functionality of my IC either, just gonna go meth injection tho.
Reply
Old Apr 21, 2017 | 08:20 PM
  #12  
Darth_Vader's Avatar
Registered User
 
Joined: Apr 2017
Posts: 11
Likes: 0
From: Midwest
Default

Originally Posted by FELONIOUS1
Damn man that's super cheap, how'd you manage that? I stole my setup brand new for $3500 with a pair of pacesetter ceramic coated long tubes so I'm really not in it for much more. I'm really not happy with the functionality of my IC either, just gonna go meth injection tho.
I did everything custom, except for the bracket, with junk sitting around from previous builds, luckily having an '05 GTO and '08 Corvette has left me with some nice parts that I never installed including a CCW head unit, lol! Meth is in my future too, though I have a BTR cam en route and will probably throw some LT4 HPFP and Injectors in to see if I can get some more fuel out of the injection window.

I think I will end up running a scoop on the IC along with some fans to pull some air. I will be following your setup closely.
Reply
Old Apr 21, 2017 | 08:41 PM
  #13  
FELONIOUS1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2016
Posts: 83
Likes: 5
From: DFW TX
Default

I am very curious in the pulley size vs boost subject as well. I am currently running the stock 8psi pulley that came in the kit. I have posted in several places and emailed procharger about it with no answer. I am wanting to order smaller pulley and meth kit but my performance progress is currently halted due to the driveshaft situation. I have to order a new driveshaft but don't want to do that yet bc I'm going to drop it and definitely need to do that before I get a custom driveshaft built.
Reply
Old Apr 22, 2017 | 10:50 AM
  #14  
Darth_Vader's Avatar
Registered User
 
Joined: Apr 2017
Posts: 11
Likes: 0
From: Midwest
Default

Originally Posted by FELONIOUS1
I am very curious in the pulley size vs boost subject as well. I am currently running the stock 8psi pulley that came in the kit. I have posted in several places and emailed procharger about it with no answer. I am wanting to order smaller pulley and meth kit but my performance progress is currently halted due to the driveshaft situation. I have to order a new driveshaft but don't want to do that yet bc I'm going to drop it and definitely need to do that before I get a custom driveshaft built.

​​​​​​What size is the 8psi pulley?

and definitely drop it first, I had to get a custom drive shaft because of that exact reason, and I'll use any excuse to buy upgraded parts.
Reply
Old Apr 22, 2017 | 11:22 AM
  #15  
FELONIOUS1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2016
Posts: 83
Likes: 5
From: DFW TX
Default

It's pretty massive, about 3 1/2" I think.
Reply
Old Apr 25, 2017 | 06:11 PM
  #16  
Darth_Vader's Avatar
Registered User
 
Joined: Apr 2017
Posts: 11
Likes: 0
From: Midwest
Default

Originally Posted by FELONIOUS1
It's pretty massive, about 3 1/2" I think.
You mind letting me know what size belt that is? I want to pick some up before my head unit arrives Thursday, would be helpful to know what the 6PK number is, I am guessing it is around a 6PK2400.

Last edited by Darth_Vader; Apr 25, 2017 at 06:17 PM.
Reply
Old Apr 25, 2017 | 07:27 PM
  #17  
FELONIOUS1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2016
Posts: 83
Likes: 5
From: DFW TX
Default

6pk2455
Reply
Old May 5, 2017 | 04:40 PM
  #18  
Darth_Vader's Avatar
Registered User
 
Joined: Apr 2017
Posts: 11
Likes: 0
From: Midwest
Default

Originally Posted by FELONIOUS1
6pk2455

Belt fit perfectly, making 9 psi on a 3.4" pulley with a P-1SC-1, putting down around 575rwhp/530rwtq but having a serious issues with IAT as I am not getting good airflow through my IC right now, guess I am leaving around 50hp on the table.

Basically maxed out on the stock fuel system right now. Safely.
Reply
Old Jul 6, 2017 | 11:32 AM
  #19  
FELONIOUS1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2016
Posts: 83
Likes: 5
From: DFW TX
Default

Picked up an L86 6.2 shortblock today to liven this beast up a bit ������


Reply
Old Jul 26, 2017 | 09:13 PM
  #20  
gonzo 6.2's Avatar
TECH Veteran
iTrader: (8)
 
Joined: Oct 2002
Posts: 4,516
Likes: 15
From: oregon
Default

Do you have this all working? How hard is it to find a 6.2 shortblock for a good deal?
Reply



All times are GMT -5. The time now is 09:14 PM.