Current setup
Stock 17s
265 70 17 Cooper AT3s
Dia - 31.6
Section Width - 10.4
Tread - 8.6
Weight - 53lbs


Option 1.
GMC Sierra Style Replica Wheel Matte Black 20x9

$844 shipped with TPS.

PARADA SPEC-X 285/50 20 tires.
Dia - 31.2
Section Width - 11.5
Tread - 9.5
Weight - 41lbs
$741 shipped

Total of ~$1585


Option 2.
GMC Sierra Style Replica Wheel Matte Black 22x9

$920 shipped with TPS.

PARADA SPEC-X 305/40 22 tires.
Dia - 31.7
Section Width - 12.2
Tread - 10.7
Weight - 41lbs
$826 shipped

Total of $1746


My truck is stock ride height and my daily that I like to race around. Im kinda thinking the 22s will look ghetto and I need to stay around 31.5 inch tire height. These tires compared to my AT3 will grip a lot better just by themselves but there is quite a tread width dif between the two. 20s have 9.5 inch tread and 22s have 10.7 inches. Both are on 9 inch wheels so the 22 will be pulled in a bit. Ideas? Input?

 

The 20's will ride nicer than the 22's.

I'd go with the 20's but ANYTHING but black wheels lol, they just look bad to me.

 

With black wheels on a black truck, you're really not gonna notice the difference between 20s and 22s. That being said, of your two choices, I'd do the 20's. Cheaper, lighter and better ride quality.

 

IMO. You have to be pretty low to pull of 22's and have them look right. I run 285/50-20 and am lowered 3/5

 

20s it is.

 

Stock 17s w 265 tires weighed 59lbs a piece. This new combo weighs 79 a piece. 20 more per corner. That's a lot of weight to look good. Very similar in height but the 20s are much wider and have a better traction compound and tread design