They have standard and low profile, which one is better. I don't have a flip kit or nothing on my truck yet. Idk if I will or not haven't made my mind up. But I do have middle leaf removed. Standard or low profile which one y'all using

 

I run the low profile one's since my truck is lowered.
if you have plenty of ground clearance run the regular ones.

 

standard for more adjustability. also check into assassin bars before pulling the trigger on caltracs. same principal, but more adjustability.

 

I order the 3400, caltracs and just got them, there the standard three hole ones. They look kind big to me is that how are, if someone have them on there truck wouldn't mind posting a picture please

 

These are not mine, i made mine with a plasma table, i was told these mesurare 5 1/2" from upper hole to lower hole and 5 3/4" between the 2 upper holes, measurements made from center of the holes, is that what your are?

 

Those look like the ones I got there huge as hell. What truck is that on? I Spoke to the place I got them said they people with lowered trucks and didn't have a problem. I put on my truck and still have alot of clearance bout 4-6" can't remember. Reason I got the 3 bolt and not the 2 bolt because of little more adjustment to a 3 bolt

 

these are on a 2002 single cab 4x4 silverado, did you install yours already?

 

Yeah those look like the ones I got. But they huge as hell though, I put it up against my truck looks like they may work. The place I got from said they had people with lowered trucks and didn't have a problem with them

 

First set I made I made the triangle a lot smaller, later it made me think they might work better if I went with 3 holes instead of 2, I don't have the new triangles ready yet, just working on it these days but I found it that 5 3/4" is to wide it would hit the peace that holds the springs together so Imuch making them a little smaller


Could u measure urs from center hole to center hole?

 

I know you already bought these but for anyone else who might be looking for traction bars for lowered trucks with flip kits and what not, Google VA Specialties and talk to Victor about his bars. He's build a lot of them and they work well.