Centerline Stingray III's 20x8.5 front 20x10 rear
 

Hello all,
Long time lurker, first time poster here. As a short introduction, I'm from Texas [born and raised]. I'm Vietnamese. Been a chevy guy all my 27 years of life. I have a 2012 galaxy black RCSB silverado ls 4.8. I've lowered it 4/7 on factory 17's. Mcgaughy's spindles, belltech springs, flip kit rear. Planning on helper bag's soon. Anyways, I've recently acquired the wheels in the title. Centerline Stingray III's 20x8.5 for the front and 20x10 for the rear. I purchased them off of craigslist, that came already widened. My question is what do you guys recommend on tire sizes? I'll upload photos of my truck and the new wheels soon when I get a chance. My rear sits about an inch lower than the front to the point where other vehicles would flash their high beams indicating that i'm blinding them at night. So the intention would be to get tires that would level out my ride, and of course, not to rub when cranking the steering on turns. I am open to possibly getting the front lowered another inch by way of struts, but for now without the front struts, what would be yall's suggestion? Thanks for yall's input, its very much appreciated!

Sweet truck man, as for sizes. I am at about a 5/7 drop and run a 275/45/20 and have never rubbed when making a full turn.

I have beltech spindles and cut springs.

285/50r20s here on a 4/7 drop but it will bottom out the front tires on a good pothole. Ive been thinking of going with a 275/45r20 or 295/45r20 but these tires still have plenty of life left.

https://cimg7.ibsrv.net/gimg/www.per...ad89bb901e.jpg
Here is the wheel next to my truck.

I really like this guys setup.

those headlights in your 2010 are pointed too high from the factory they blind oncoming traffic from gm, you can realign and adjust the beam on your lights. lower your front 1" to match the rear. the stingrays will look good on your truck regardless as for tires you should be able to run up to a 325 or 335 on a 10 wide rim but being lowered you'll run into fitment issues with a rim that wide and not having a narrowed rear end.

That's bad ass.
Do you know anything about those wheels?