Bed side panels
First off I apologize if this is in the wrong section. I wanted to ask if anyone knew of where I can buy good quality nbs bed sides I've searched and found a few options but don't wana end up with horrible fitting parts.
Thanks in advance |
I have only installed OEM bed sides or used OEM panels.
Is this for a normal bed or for a step side??? |
This is for a normal bed I got hit in the back under the tail light parked my truck has a welded in roll pan so I'm between a new used bed or new bed panels to ensure no body damage
|
Originally Posted by Castro45
(Post 5313701)
This is for a normal bed I got hit in the back under the tail light parked my truck has a welded in roll pan so I'm between a new used bed or new bed panels to ensure no body damage
Most of the time I just swap another used bed. Which side was damaged? Where in CA are you located? |
I'm in San Jose ca. The price of new panels is around 650 dollars plus a new roll pan. So it's close to the same price as a used bed off craigslist. I've checked price a few times at dismantlers and it's much more for a used bed
|
Originally Posted by Castro45
(Post 5313731)
I'm in San Jose ca. The price of new panels is around 650 dollars plus a new roll pan. So it's close to the same price as a used bed off craigslist. I've checked price a few times at dismantlers and it's much more for a used bed
I have seen them for $200-$300 with damage to 1 side and around $600 for a nice used one on craigslist. If you don't find any thing and your willing to drive down to Orange County let me know. |
All times are GMT -5. The time now is 04:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands