one of my friends said he has a hemi and he wanted to race. I said why not, i just wanted to see if I could keep up. He brought it to work and we went to an emty street and ran twice for a dead stop to about 70. right off the line I started pulling on him, i problibly had 1or2 trucks on him at the end . I knew it wasn't an hemi an sure enough it was only a 4.7 , he just said it was an hemi just to scare me

 

Good kill. A 5.7 Ram would have put up a better fight. Nice work showing him who is boss.

 

how much hp does the 4.7 put out.

 

3.7-liter V6 (215 horsepower and 235 pound-feet of torque),

4.7-liter V8 (235 horses and 295 lb-ft) and

5.7-liter Hemi V8 (345 ponies and 375 lb-ft of torque).

They are kind of heavy weighin over 5000 pounds for the RC.

http://www.edmunds.com/new/2005/dodg...884/specs.html

 

well the rcsb only weigh about 4500 w/o the driver cuz there were a few at the track when i was there. anyway you should pull pretty hard on a 4.7. cuz a buddy of mine has an ecsb 2wd 4.7 and i put at least 8 to 10 trucks on him to about 100 so you should pull him a little better with the mods you have, unless you being an ec slows you down that much.

 

Nice kill! I tell people that I have a 4.7 sometimes (debadged) just to mess with their heads when I spank them. But for him to say he has a hemi when he doesn't makes him look silly!

 

hey man if you dont mind me asking, what are your 1/4 times, and do you have any pics of your truck cuz it sounds like its sweet looking!