Yeeeuup...another turbo build
#23
Thanks, Idk about the trans yet. I took a chance and threw it in. I discovered the pump gear was installed backwards when I was trying to slide the converter on. When I pulled the pump it was clean and looked like it had been rebuilt. Most of the dirt and grit was in the stock pan which had a hole in it and wiring harness so I cleaned that up. I have to get back to work on the fuel system before i can fire it up.
The following users liked this post:
Feed (07-28-2017)
#28
After at least two weeks of over analysis paralysis, I'm not going to mount my FPR to the fire wall this is what i came up with...
I have keys to a full machine shop 5 minutes down the road but who who needs all that ****?
Wasted time
Upgraded to the 4" intercooler from Trick during the summer sale. Intercooler only so it needed, a mount...**** hand tools
It's solidly mounted now, just need to work out the piping.
Hopefully photobucket is still giving me a free pass, I've been afraid to use my account...
I have keys to a full machine shop 5 minutes down the road but who who needs all that ****?
Wasted time
Upgraded to the 4" intercooler from Trick during the summer sale. Intercooler only so it needed, a mount...**** hand tools
It's solidly mounted now, just need to work out the piping.
Hopefully photobucket is still giving me a free pass, I've been afraid to use my account...
The following users liked this post:
Boost-freak (10-10-2017)
The following users liked this post:
Feed (10-09-2017)