LS6 Engine Swap into '00 Sierra stepside
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Farmington, Mn
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
LS6 Engine Swap into '00 Sierra stepside
Everyone's getting tired of me saying "I have an LS6 on the stand" so...
I finally put it in my truck. 1 1/2 days and a trip to Fleet Farm for a bigger pry bar to seperate the tranny (thanks for your advice guys). Should have it wrapped up by afternoon tomorrow and get started on the HP Tuner. Fortunately I had a good friend stop by and give me a hand.
Hopefully my tranny will last a season or two
I finally put it in my truck. 1 1/2 days and a trip to Fleet Farm for a bigger pry bar to seperate the tranny (thanks for your advice guys). Should have it wrapped up by afternoon tomorrow and get started on the HP Tuner. Fortunately I had a good friend stop by and give me a hand.
Hopefully my tranny will last a season or two
Last edited by NoShow; 01-06-2010 at 08:08 AM.
#3
Launching!
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Farmington, Mn
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
OK after a few hangups and leaks, I ran the tune and she fired right up. Now I've gotta figure out how to run the "gauge" screen on the scanner so I can read my timing and A/F. Here's a pic of the engine installed..Not much different to look at
Here's my homemade traction bars:
The B&M rachet floor shifter:
Now if anyone has a couple grand I can borrow I'll get some headers, hi-flow cats, x-pipe, dual Dynomax, and a set of rims and tires
Here's my homemade traction bars:
The B&M rachet floor shifter:
Now if anyone has a couple grand I can borrow I'll get some headers, hi-flow cats, x-pipe, dual Dynomax, and a set of rims and tires
Last edited by NoShow; 01-06-2010 at 08:16 AM.
#5
On The Tree
Join Date: Feb 2004
Location: North Georgia
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
You'll enjoy that ls6, ive got one in my 99 rcsb 2wd sierra. It's got a cheatr cam and stage two patriot heads on it, w/ a 4l65 trans. I need to update my sig at the bottom
Trending Topics
#9
Launching!
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Farmington, Mn
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Videos coming soon. Just looking at cameras today. Problem is, it's hard to do smoky burnouts in the snow.
Thanks for the compliments- Especially from guys that work as hard on their own stuff
Thanks for the compliments- Especially from guys that work as hard on their own stuff
Last edited by NoShow; 01-08-2010 at 09:29 PM.