GMC Syclone #569 Build
#192
That sucks man! I guess it'll give you a chance to build it up with good parts if you decide to go that route. I'm surprised you didn't pick up any knock. Are you datalogging through the Holley?
#193
10 Second Truck Club
Thread Starter
No knock in the logs. A cylinder straight up not firing isn't gonna knock tho.
#196
10 Second Truck Club
Thread Starter
Block, heads and misc parts are back from a bath.
My newish pistons arrived and rods should be here today. Crank is out getting shined up.
My newish pistons arrived and rods should be here today. Crank is out getting shined up.
#198
10 Second Truck Club
Thread Starter
Had some fun with a guy that does toon cars and got some decals made. He is @mfrex on Insta check him out if you haven't. I do still have about 40 of the stickers left, they're $4 each if you want one pay via www.paypal.me/Syclone
#199
10 Second Truck Club
Thread Starter
And back to work. Assembly time...
I was about to install the heads, but then a spray into the ports revealed a handful of leaky valves. There was also a crack between two valve seats after closer inspection.
So I ended up with my springs and retainers in a freshened set of 181 castings.
I was about to install the heads, but then a spray into the ports revealed a handful of leaky valves. There was also a crack between two valve seats after closer inspection.
So I ended up with my springs and retainers in a freshened set of 181 castings.