| 06tx4.8 |
Mar 27, 2012 06:25 PM |
Ghetto van project
5 Attachment(s)
ive been helping a close family friend since late september 2011 on this project. It is a 1963 Grumman delivery van. Outside is all aluminium. He bought a wrecked 2007 chevy van for the drivetrain and part of the frame. front frame section was narrowed 6 inches, and new frame was hand built from motor back. We are keeping the leafs with airbags for load support. drivetrain is a stock 5.3 and 4l60e out of the wrecked van. Rearend we narrowed 5" on each side, we are going to run a 24x12" rear wheel!!:devil: This is going to be used as an RV, motocross hauler, and whatever else. It will have full a/c, running cold and hot water, Honda generator, and at least one flat screen tv w/ mobile satellite. Here are pics of the progress. haven't piced out the wheels yet, front will be 22x8, and rears 24x12" w/ a nice deep lip. Outside will be 100% polished alumiium with the exposed rivets. we have the wheel tubs in and rearend hump installed in the interior. I will have more pics of that this weekend We just got the rendering from Eric Brockmeyer last week. He is one of the most well known rendering artist in the hot rod world. Has done many renderings for Foose, Coddington, and many others. On to the pics, plan is to go to Heatwave this year for our first show. It wont be 100% then, but we plan on taking it. Big show will be SEMA. We plan on driving it there this year!!!:eek2:
|
