Another RCSB Duramax and SAS
#33
Piss Pumps for Sale
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Moncton, New Brunswick, Canada, The True North Strong and Free!
Posts: 2,685
Likes: 0
Received 1 Like
on
1 Post
Cut the frame with a grinder and zip disc. The last picture of the rear frame is exactly how it was when I slid it into the section of frame the cab is on, it literally slid right into place, just lined it up where the old welds were and rewelded it.
#34
Piss Pumps for Sale
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Moncton, New Brunswick, Canada, The True North Strong and Free!
Posts: 2,685
Likes: 0
Received 1 Like
on
1 Post
Decided to section my downpipe and make it a true 4'' instead of the typical 3", figured now was a good time to do it while I was waiting for other parts instead of 6 months down the road when the mods come.
Also ran a homemade 5" exhaust all the way back from the 4" downpipe. Also my new rearmost shock cross member can be seen here. What cant be see is how far the bed mounts were moved forward as well as the 5.5" I had to cut off the very back of the frame
and just for fun, small moose that was outside my bedroom window when I woke up the other morning
Right now Im just waiting for my new spring perches for the front of the rear leaf springs, once those come in I can install the fuel tank and throw the bed back on. So Im kind of at a stand still at this point.
Also ran a homemade 5" exhaust all the way back from the 4" downpipe. Also my new rearmost shock cross member can be seen here. What cant be see is how far the bed mounts were moved forward as well as the 5.5" I had to cut off the very back of the frame
and just for fun, small moose that was outside my bedroom window when I woke up the other morning
Right now Im just waiting for my new spring perches for the front of the rear leaf springs, once those come in I can install the fuel tank and throw the bed back on. So Im kind of at a stand still at this point.
#38
Piss Pumps for Sale
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Moncton, New Brunswick, Canada, The True North Strong and Free!
Posts: 2,685
Likes: 0
Received 1 Like
on
1 Post
thanks for the positive comments guys! Rest of my parts should be in tomorrow! Except my 03+ tails
Trying to keep her clean, just a nice small 4wd, no brush guard on this one, sleek lines, I got a bit of a lift on her to make her stand taller
Trying to keep her clean, just a nice small 4wd, no brush guard on this one, sleek lines, I got a bit of a lift on her to make her stand taller
#40
Piss Pumps for Sale
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Moncton, New Brunswick, Canada, The True North Strong and Free!
Posts: 2,685
Likes: 0
Received 1 Like
on
1 Post
Progress has started again. I got my leaf spring hangars today so I went ahead and installed them, got the truck back on its own wheels.
New hangars
Installed
Off the jack stands
Painting some more of the frame tomorrow now that I got more por15, putting the fuel tank in tomorrow and getting the bed ready to go on.
New hangars
Installed
Off the jack stands
Painting some more of the frame tomorrow now that I got more por15, putting the fuel tank in tomorrow and getting the bed ready to go on.