09 avalanche daily documentation thread
#1
09 avalanche daily documentation thread
Just thought cause im bored and id like to document my trucks progress.
heres what i started out with, an 09 avalanche, 5.3 6l80e truck 2wd with 62k miles on it when i got it a year ago. Grandpa style truck
First thing first, pulled the bug deflector off and got some 20" centerlines from my boss.
badges had to go
done
black emblem
up next was the tailgate
tailgate done, unfortunately this is the first gm truck that i have encountered that has holes behind the emblem
previous owner had some cheap led driving lights that were burnt out so i replaced them with the sylvania LEDS
Random towing, 6l80e feels way better towing then a 4l60e
off to the exhaust shop
had a Pypes race pro muffler installed and all 3 cats removed
had a diesel exhaust down turn tip given to me, wasnt too sure how it would look, but i like how it came out
hoover dam
LED bed light cause the factory one went out
heres what i started out with, an 09 avalanche, 5.3 6l80e truck 2wd with 62k miles on it when i got it a year ago. Grandpa style truck
First thing first, pulled the bug deflector off and got some 20" centerlines from my boss.
badges had to go
done
black emblem
up next was the tailgate
tailgate done, unfortunately this is the first gm truck that i have encountered that has holes behind the emblem
previous owner had some cheap led driving lights that were burnt out so i replaced them with the sylvania LEDS
Random towing, 6l80e feels way better towing then a 4l60e
off to the exhaust shop
had a Pypes race pro muffler installed and all 3 cats removed
had a diesel exhaust down turn tip given to me, wasnt too sure how it would look, but i like how it came out
hoover dam
LED bed light cause the factory one went out
#2
had a little trouble at the tire shop and they messed up the centerlines by leaving the lug nuts loose and they gave me these to roll around on till replacement wheels showed up
new wheels came in. 22" gmc replicas on a 305/40 r22 nitto 420s
time for a little brake upgrade. powerstop kit all around
trans temps were always close to 200 degrees being in arizona and crusing on the freeway i wanted to do something to help out
full set of AN fittings to do braided steel lines
this pricey little piece for the 6l80e to run -6 an fittings
front clip removed for access
cooler mounted up
nicely tucked behind the grill, and the emblem needs touched up lol
ive put 2 motor mounts in it at this time now
trying a poly trans mount to see if that'll help with motor mounts breaking