NITROUS OXIDE System Designs | Installation| Wet/Dry/Direct Port

High Compression/Nitrous on E85 Setup

Old 03-07-2019, 12:36 PM
  #21  
TECH Fanatic
Thread Starter
iTrader: (3)
 
foose04's Avatar
 
Join Date: Dec 2009
Location: Charleston, SC
Posts: 1,560
Received 3 Likes on 3 Posts
Default

Thanks guys! Have to scratch that Ricky Bobbie itch!

Here’s another video my buddy tagged me in, same race.

Old 04-03-2019, 06:20 AM
  #22  
TECH Fanatic
Thread Starter
iTrader: (3)
 
foose04's Avatar
 
Join Date: Dec 2009
Location: Charleston, SC
Posts: 1,560
Received 3 Likes on 3 Posts
Default

Well one last update because I got picked up for a 6 month deployment. Now I get to read about everyone else having fun this summer lol. We did a 25 mile cruise/ street car shoutout and made some progress. We got beat by the guy who won, but hey that’s ok. I didn’t do much more testing on the 250 as I planned to run this car more on the 300-350 and the guys I race I need all that and then some. Soo, I made 2 hits on a 300 pulling 13 degrees from 28 and car picked up into the 5.3x area. Was running a little rich seeing some high 10s in high gear. I cleaned it up more each pass and it was picking up, but never got a good 11.5 airfuel pass. Without a way to pull the car around (golf cart is down) I wasn't able to get very good readings off the plugs. From what I could see, it was slightly rich and had room for more timing. Last two was on a 350, pulling 15 through peak torque, and 14 out past 6800. Again new jetting was a little rich touching some mid upper 10 afrs in high gear.

When I get home I need to either get some new slicks as these puppies are almost down to bottom of the wear indicators lol or consider going to a radial. I need to get the 60s in the 1.1x life as a nitrous car.

Overall, pretty damn happy with the setup.




Old 04-03-2019, 08:21 PM
  #23  
TECH Junkie
 
ZO6Ted's Avatar
 
Join Date: Jan 2007
Location: Arlington, TX
Posts: 3,294
Received 252 Likes on 164 Posts
Default

Yep. She's a badass! Loved the vid.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:58 PM.