99-06 Intake manifold with NX Direct port
We just did this for a customer that was dead set on keeping his stock intake manifold. Turned out pretty nice.
http://www.nitrousexpress.com/media/galleries/6/645.jpg |
What does that cost?
|
Pm sent
|
that looks sweet. You guys seem to top notch direct port setups.
|
Nice. I'm wanting to squeeze our '03 Escalade ESV and have looked at your kits. What's the set up cost and what other modifications are needed to support it? Thanks.
|
PM Sent
|
what does this cost?
|
Looks expensive. lol.
|
Originally Posted by bottledls6
(Post 5254765)
what does this cost?
|
how much for everything to put it on my LSXRT?
|
Originally Posted by GREENSIERRA
(Post 5254895)
how much for everything to put it on my LSXRT?
|
Nice how much setup
|
Originally Posted by rmill05
(Post 5258519)
Nice how much setup
|
nice how much setup ?
|
nice how much setup
you dont have to send me a PM, everyone knows turbos are how you go fast! :D |
Yeah go ahead and PM me a price on the setup for a 4.8 with a LS6 manifold.
|
Originally Posted by USMCvet0311
(Post 5271344)
Yeah go ahead and PM me a price on the setup for a 4.8 with a LS6 manifold.
|
Looks sick. That on my intake would be nasty!
|
Originally Posted by shaw_426hemi
(Post 5271757)
Looks sick. That on my intake would be nasty!
|
Any chance the factory cover still works? With everything covered it would really give it a sleeper look
|
That looks bad ass.
|
That's a sick looking setup NX!!
Do you have a thread on how you did that intake? Thanks
Originally Posted by shaw_426hemi
(Post 5271757)
|
Alright go ahead and send me a price tag for it I might be considering the spray but just curious do yall make a kit where I can hide it uinder my plastic cover?
|
Originally Posted by Goat's ss
(Post 5274292)
Alright go ahead and send me a price tag for it I might be considering the spray but just curious do yall make a kit where I can hide it uinder my plastic cover?
|
I’ll take both quotes too. I’m in the market now for a goodsetup. Take a look at my cam specs. Is there a better cam to go to whilespraying?? I will be upgrading the intake and 97mm - 102mm TB... decisions, decisions. |
Quote on stock intake?
|
Sorry for the late response.
Direct Port w/ 10lb bottle $1202 Rail Upgrade $150 Labor to plumb it $400 Total $1752 [ Turn around time is a week from the time to receive the intake ] -Chris |
To hid this system under say, a TBSS intake for my Gen3 6.0 considering all the upgrages I have listed in my sig, how much power can I relistically / put to the wheels reliability speaking?
|
On the TBSS manifolds there isn't a good way to do a hidden spray bar in them. You would be better off doing a single nozzle on the bottom side of the intake tube if you are still wanting to do something and keep it pretty hidden.
On that setup you should be able to add 200hp easily |
can you pm price to plumb lsxrt I already have a nossle kit so I dont know what else I need to switch to direct port. Its on a forged 383 with a 227/233/.584/,584 113 lunati cam dart heads how much can I reliably spray with a direct port. also have dedicated fuel system for nitrous
|
Originally Posted by Fast6.3
(Post 5301417)
can you pm price to plumb lsxrt I already have a nossle kit so I dont know what else I need to switch to direct port. Its on a forged 383 with a 227/233/.584/,584 113 lunati cam dart heads how much can I reliably spray with a direct port. also have dedicated fuel system for nitrous
|
Direct port
Originally Posted by Nitrous Express
(Post 5242246)
Pm sent
|
Originally Posted by 01silverado20
(Post 5365116)
What is the cost of this set up stock intake manifold 99-07 direct port nitrous
|
Originally Posted by 01silverado20
(Post 5365116)
What is the cost of this set up stock intake manifold 99-07 direct port nitrous
Direct Port w/ 10lb bottle $1202 Rail Upgrade $150 Labor to plumb it $400 Total $1752 [ Turn around time is a week from the time we receive the intake ] |
Assuming mechanical strength of the rotating assembly is adequate...
what are the HP limits of this direct port system? and what are the limiting factors if it is not a component of your system? i.e. spark blow out from stock ignition, or something like that.... Thanks! |
What a sweet looking setup! I'm sure it performs just as good as it looks! On my wish list for sure Lol
|
All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands