|
PROCOMP LS6 heads?
Can anyone give me any input on these heads? All i could find for info on these heads is that they have 190cc intake runners, 64cc combustion chambers, CNC'd runners/combustion chambers, and they support 500+ horsepower. What i'd really like to know is he anyone has ever flow tested these or have any dyno results. The only reason i'm interested in these is cuz a buddy of mine is giving me a killer deal on a set. They're new and never installed with stainless valves.
|
Originally Posted by LS1FREEK
(Post 4568100)
Can anyone give me any input on these heads? All i could find for info on these heads is that they have 190cc intake runners, 64cc combustion chambers, CNC'd runners/combustion chambers, and they support 500+ horsepower. What i'd really like to know is he anyone has ever flow tested these or have any dyno results. The only reason i'm interested in these is cuz a buddy of mine is giving me a killer deal on a set. They're new and never installed with stainless valves.
Originally Posted by Shawn @ VA Speed
(Post 12443793)
junk-no sense on spending good money on bad parts.seen many of the pro comp heads crack.
Originally Posted by G Engines
(Post 12446262)
Their rods are scat rods that scat was't happy with not to say their is some defect with them , but they didn't pass inspection for some reason. Their heads are a Patriot reject casting same as a Pbm cheep but you get what you pay for.
Originally Posted by ramdaspadhye
(Post 12275820)
Those are pro-comp heads. I would stay clear of them if they're made anything like the procomp SBC heads... You'll need to have the deck squared and lap the valves...
https://ls1tech.com/forums/generatio...vs-square.html IMO, heads are too important of an item to gamble with. Stick with the models with a proven history. Rick |
Funny how you mentioned Pro Comp, as my dad (professional race engine builder since 1971 with over 40 national records) and I were just talking today about how everything that they make is cheap junk...we even discussed how low quality their stainless valves are.
|
Thanks for the input guys! Looks like I'll be going PRC's! When the time comes... Lol
|
| All times are GMT -5. The time now is 07:39 AM. |
© 2026 MH Sub I, LLC dba Internet Brands