Cam selection --- LM7 c-10 conversion
 

Hello,

Been reading alot on ls based engines and finally made the switch, just bought lm7 for my 86 c-10, looking for around 340hp 340tq at the wheels or close

Question -

Want to run biggest cam i can in stock LM7 and still have good torque and possibly later down the road a nitrous hit too get the truck moving a bit.

Definate mods -
3600 stall - th350
4.10-4.30 gears
LT Headers
Intake swap - Depending on what i can find on ebay for a deal


-ie- tourqer v3? or next one smaller?

Truck - 1986 C-10 with Th350 3600 stall conveter 4.11 gear(might go 4.30)
has 22inch wheels for street 12.5 wide 33 tall but track is 28x10.5

Have been looking at tsp and thunder racings kits. any others i havnt searched as much

might try the TSP 228/228

the torquer v3 is made for 400+ cu.in. strokers

most go with a 220/220 or a 224/224 at most