5.3 rebuild
I had some slight melting of the pistons. Anyone thing this cylinder could be a candidate for a ball hone and throw some gen3 flat tops in it? the Worst gouges barely catch a nail https://cimg8.ibsrv.net/gimg/www.per...4dfed728b.jpeg https://cimg8.ibsrv.net/gimg/www.per...420caae9d.jpeg |
Dingle ball hone that sucker and run it.
|
Dingleball and see if those "gouges" come out.
|
Gouges won't come out but Dingle ball hone will remove the sharp edges. Ball hone and run it.
Why did you have the melt down though? |
All times are GMT -5. The time now is 08:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands