I have a 09 tahoe with a 5.3, plan on deleting the dod figured while it was apart might as well change the cam. Does this cam exist or is it possible?

1. more low end
2. more power from idle to 3500rpm
3. work with stock stall and manifolds

Basically try to make the 5.3 drive closer to the 6.2's. I am not concerned at all about peak hp. Does anyone have any real world experience on a cam like this? I have spoke to several people who spec cams and they all say there cam "should" do that. I would like some real world feedback and not be the tester, lol.

 

Idk about the DOD part, but my 210/216 .584/584 on 116Lsa is dramatically better down low, but really wakes up around 2000 rpms and pulls nicely all the way to 6300rpms

Here is video of it puttering around with the low end tq easily gets to 30mph under 1500 rpms


Here on getting on the highway 2000-2500rpms

 

Well the lifters ended up getting changed under warranty this week so I'll put off the cam for a little while longer.