07Softail

Wasup guys... I have been in contact with Nick and Sue at American Racing Headers about doing some 2" primary headers for the GEN V trucks so here's the deal...I need 10 FIRM orders and a truck located in Long Island to do a test fit. Price is $1783+shipping
Since the 2" headers did well on the Old platform trucks with forced induction they ought to perform just as well with a blown DI GEN V engine (just my thinking) and I could be wrong too.
For others that are on other forums feel free to post this elsewhere, I'm not sure if I'm supposed to do it here but I'm sure someone will chime in. This is the only site I frequent on a regular base that has HP junkies on it. Let me know your thoughts on this please

RT

allenp

Sign me up!

wuznme

iTrader: (2)

Are you changing from 1-3/4 to 2" ?

What's included in that price?
No cats?
Cats?

07Softail

Allen I figured you would be on board since you are leading the Big Power GEN V on this site so far. I am swapping the 1 3/4 for the big'uns and one day I will get off my *** and put this 6.2 in. These are non catted and I will be ceramic coating this set though as I am a believer in the stuff. Lets make it happen pass the word.

RT

thewrx

They dont seem to making too much power on the vette motors, but i would get arh just for the fitment alone. Interested here

wuznme

iTrader: (2)

I would save your dollars, the HP to cost ratio is too high to make the switch, especially compared to the TVS you put on.

07Softail

I most likely will go F1 procharger, Holley Hi Ram and a 400+inch motor down the road.

RT

allenp

Bump. Got one more guy that's in, sooo only 7 more to go? Lol

07Softail

Good deal! It's going to be tough but hope it works out. I'm guessing they will eventually build them as people start requesting them, it's just so early in the game.

RT

thewrx

i know my tvs blower would appreciate the breathing room and lowering those egts, removing the cats made a big improvement.pwr wise still up in the air a new ypipe might do just as good