Markystang

So the drivers seat in my 2008 Sierra is pretty worn out. The fabric has a few holes in it, and the foam has collapsed to the point that I can feel a steel bar or something in my lower back.

What are my options besides calling the local wrecking yards? Are there any reasonable aftermarket options? Either "rebuilding" them or aftermarket seats?

Thanks guys!

wretched73

iTrader: (1)

Someone has a build thread on here and he replaced his seat cushion with an aftermarket one, I'll see if I can find it

Markystang

Thanks!
Any idea who it was?

1FastBrick

iTrader: (17)

You can buy the OEM foam on line such as ebay. Fabric covers are hard to come but Some times you can find some take off fabric cover's though.

Search Ebay.

arthursc2

iTrader: (5)

1FastBrick

iTrader: (17)

The Base is different Left to Right on both platforms

2002_Z28_Six_Speed

iTrader: (20)

even for my year model i was able to buy the seat covers directly from GM

arthursc2

iTrader: (5)

but the foam is the same, left to right isnt it? Unless I am thoroughly confused, we swapped seat foams when we did seat heaters in a 2002 Yukon. I dont think we even had to cut the slit for the lower belt pass through because it was already there.

1FastBrick

iTrader: (17)

No, the foams are different and had separate part numbers. They are no longer showing availibe from GM so I can't even find part numbers.

I know I have a new 99-02 driver side foam at my house. I never installed it before I sold the truck.

arthursc2

iTrader: (5)