Rhino79

iTrader: (7)

Here is the deal. I will be running the Wood Haulers truck against a modded Lightning tomorrow night and would like for you guys to chime in and give me some input. The Lightning has a 6lb. lower pulley, catback exhaust, and intake, and claims to run 10.50's 1000 ft. times (I think thats about 12.6 in the 1/4). Right now I think the Hauler is capable of 12.80-12.90's, in full street trim. Do ya'll think that removing the spare, tailgate, and everything possible inside the cab... (clutter behind the seat), (and also the fact I weigh about 150 and he weighs 280), will be enough to get me close enough to possibly holeshot him and hold on. The spot we will be running at is in between 1000 ft. and a 1/4. The Lightning runs on Nitto 555's and I will be running ET Streets. What do you ya think....any wiehgt reduction secrets or help much appreciated.

Oh yeah I WILL post the videos when I get back.

Tan327

iTrader: (15)

Take off everything you listed, it all adds up. It should be a good race, boy I sure do wish I was back in Arkansas right now, I'd like to get in on some of this action!

v8

iTrader: (10)

what all is done to woodhaulers truck. ecsb or rcsb?

Rhino79

iTrader: (7)

It's rcsb 02 4.8l w/ 4.10's, locker, tci 3000, transgo and servo, 2.5" dual exhaust w/o cats, e-fans, 160 stat, CAI, 125 NX wet shot, 28x11.5x15 ET Streets, and an EFILive custom tune.

ap2002

iTrader: (8)

take the bumper off too...

virgils4.85spd

Run that beast on E!! Less weight from gas!

litreddevil

iTrader: (4)

take all the weight out that u can u may want to take the pass. seat out to and just for the pass take off the belt.

Rhino79

iTrader: (7)

Does pulling the headlight out on the rh side help? I have seen a lot of people do it but have never done it.

bluecajun5.3

iTrader: (31)

i do it. it helps if you have an intake...

Rhino79

iTrader: (7)

What's your Race weight BlueCajun?