Heater Core Hose size, is it 5/8 or 3/4?
I gotta reroute my heater core lines are they 5/8 or 3/4?
|
i used 5/8 and 3/4 all mixed up... :D
|
Corey, for answer, contact Redneck Engineering outta Mississippi. :redneck:
Oh, I see they already posted up. :P |
Corey, I sent u a couple texts, does that help?
I've got a box of hoses at home, but won't be home for quite some time. And I have both sizes too. If I had em, I could verify to rule out, but 5/8" is it IIRC. |
I have used 5/8 on all of my stuff.
|
:D
ive used both.. but cant remember which way i adapted it to.. right now i have it goin to the passenger firewall and looping it by the coolant res and under the air box so it stays away from the turbo and down pipe.. |
Originally Posted by nonnieselman
(Post 5023465)
:D
ive used both.. but cant remember which way i adapted it to.. right now i have it goin to the passenger firewall and looping it by the coolant res and under the air box so it stays away from the turbo and down pipe.. |
Originally Posted by fastnblu
(Post 5023461)
Corey, I sent u a couple texts, does that help?
I've got a box of hoses at home, but won't be home for quite some time. And I have both sizes too. If I had em, I could verify to rule out, but 5/8" is it IIRC. |
Originally Posted by nonnieselman
(Post 5023465)
:D
ive used both.. but cant remember which way i adapted it to.. right now i have it goin to the passenger firewall and looping it by the coolant res and under the air box so it stays away from the turbo and down pipe.. Corey, PM sent. |
I unhooked my heater core and ran my w/a water thru it during the summer.. then changed it back to where it goes to my passenger fender.. so ive changed it a few times.. just cant rem what all fittings and adapters i rigged to make it work.
|
I got 5/8" hose but haven't installed them yet, so I can't confirm that it's the correct size.
|
Originally Posted by Ferocity02
(Post 5024780)
I got 5/8" hose but haven't installed them yet, so I can't confirm that it's the correct size.
If Corey responded to his PM's, he'd have the info. :punch: |
One of them is completely 5/8"
The other one is that Y piece...from the pump to the y is 3/4", from one end of the y to the heater core is 5/8" and from the other end of the y to the coolant tank is 1 1/16 I believe. |
Originally Posted by Atomic
(Post 5024830)
One of them is completely 5/8"
The other one is that Y piece...from the pump to the y is 3/4", from one end of the y to the heater core is 5/8" and from the other end of the y to the coolant tank is 1 1/16 I believe. |
Yes. 3/4 on the single side, 5/8 and 1 1/16 on the split end.
|
All times are GMT -5. The time now is 09:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands