Stock LQ4 Pistons and Rods
#1
Stock LQ4 Pistons and Rods
I have a set of pistons and rods from an LQ4. They're the dished pistons with press in wrist pins. The wrist pins were pressed on by my machine shop and they re-rounded the rods for ARP bolts.
You'll HAVE to get some ARP rod bolts. They come with stock bolts just to keep the caps with the correct rod but I removed the bolt sleeves because the ARP bolts don't use them. The ARP bolts do not come with the set.
There's one little nick in one of the pistons but my machinist said it was nothing to worry about. I'd probably smooth it out a little if I were going to use these. This is a good clean set, and cheap!
Sold for $65 shipped!
You'll HAVE to get some ARP rod bolts. They come with stock bolts just to keep the caps with the correct rod but I removed the bolt sleeves because the ARP bolts don't use them. The ARP bolts do not come with the set.
There's one little nick in one of the pistons but my machinist said it was nothing to worry about. I'd probably smooth it out a little if I were going to use these. This is a good clean set, and cheap!
Sold for $65 shipped!
Last edited by axekick; 11-30-2011 at 09:11 AM. Reason: Price Update
#6
Some more info on these, They're from a block that had the different length head bolts (pre 2004) but they had coated skirts. Thats all the info I have relative to what year they came from.
Like I mentioned before, they are press in wrist pins and have already been assembled by my machine shop (Performance Machine in Hutto, TX).
Here's a couple more pics:
Like I mentioned before, they are press in wrist pins and have already been assembled by my machine shop (Performance Machine in Hutto, TX).
Here's a couple more pics: