|
Race Truck Parts!!
Well guys making the move to a Holley EFI Setup so I'm getting rid of a lot of stuff I can no longer use. If you have any questions feel free to ask. Most of this stuff has only been on the truck for a few months and has very minimal run time. I have a Custom BP Automotive Harness with 05 ECM that is more for a race inspired truck that has weight savings in mind and only controls the necessary functions much like a stand alone harness.This harness is only for guys using a TH400 or similar transmissions that do not require electronic control as everything to control a trans has been deleted besides a speed pickup. Harness utilizes genuine GM connectors and Factory Color correct wire so GM harness diagrams may be referenced if needed. Based off an LS2 harness it does use EV6 Injector connections. This harness has been built to remove GMBC (Generator Battery Control Module), EVAP, Trailer Wiring, Fuel Pump Harness (12v Key on Source remains for Aftermarket Pump Power, Transmission Harness, Rear 02 Sensors, MAF Sensor (SD Tuned), A/C Compressor, and ABS Harness. Items added were IAT Sensor for SD Tuning and 12v Key on Power Wire for accessories. THIS IS NOT A REWORKED FACTORY HARNESS, IT WAS BUILT FROM SCRATCH!! I've included a few pictures to show just how much this harness installed cleans up the engine bay and also removed 15-20lbs of unecessary wiring. $450 SHIPPED X-LINK TO RUN LS2/LS3 DBW THROTTLE BODY $185 SOLD!!! TURBOSMART EBOOST2 $475 PENDING SALE!! AUTOMETER NEXUS GAUGES FUEL PRESSURE & BOOST WITH COMPUTER AND REMOTE $125 SHIPPED AEM WIDE BAND WITH SENSOR AND BUNG $130 SOLD!!! 3 GAUGE A-PILLAR POD $30 MSD 8733 2 STEP $190 SHIPPED SOLD!!! FACTORY GM LS3 THROTTLE BODY $115 SHIPPED SOLD!!! https://cimg5.ibsrv.net/gimg/www.per...8aa0de3d0.jpeg https://cimg5.ibsrv.net/gimg/www.per...d11850d71.jpeg https://cimg5.ibsrv.net/gimg/www.per...aa38a8a0c.jpeg https://cimg0.ibsrv.net/gimg/www.per...50fe43d74.jpeg |
What size is the LS3 thottle.body?.I have a drive by cable setup on my 102 and I need to upgraw it a 102 DBW. Thanks
|
All LS2/LS3/LS7 are 90mm |
What does the nexus do exactly? also what’s the harness for/off of? |
Sorry also I’m interested the throttle body but any of them cable driven? |
Originally Posted by chevykev
(Post 5448866)
What does the nexus do exactly? also what’s the harness for/off of?
Originally Posted by chevykev
(Post 5448867)
Sorry also I’m interested the throttle body but any of them cable driven? |
Here's a video when everything was still in the truck as you can see everything works as it should I also explain some of the Nexus features. I think I forgot to mention you can also record runs with them.
|
Ok so I’m still a little lost as to what it is exactly it does. Does it it’s make the dash function? Sorry just curious cause this might work for my turbo 5.3 build |
Think of it as a minimalist harness. It Has the minimum necessary for the truck to function like factory. But everything that isnt necessary for the truck to run has been removed. |
Ok I got you. That’s the harness though right? What’s the nexus piece you’re selling is t the computer? Sorry |
| All times are GMT -5. The time now is 03:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands