Maggie rear cog drive TVS2300 F/S
11-15-2017, 06:57 PM
#1
Maggie rear cog drive TVS2300 SOLD!!!
Added injectors now. This was never installed since I bought it, It sat in my spare bedroom along w/ all the other parts that were gonna go on the truck. The setup will come as you see in pics. Looking to get $4900 shipped and insured unless your local then it will be minus shipping. Heres the original post w/ more details on the blower setup
https://www.performancetrucks.net/fo...-power-546904/
4700 shipped now SOLD!!!
Parts list:
Maggie 2300 intercooled w/ cog drive and 3.2 pulley
102mm ported inlet
Cogged overdrive rear pulleys and cog belt
Notched fuel rail
Port matched rectangle port lower manifold
RDS phenolic spacer
5" cold air intake tube and K&N filter w/ mounting hardware
Front coolant x-over
Alternator relocate bracket and bolts
Coolant hoses
Gates fleetrunner 8 rib HD belt
New Gates 8 rib HD tensioner #38518
New Moroso coolant tank for battery location
https://www.summitracing.com/parts/mor-63495
New FAST 88lb injectors
https://www.summitracing.com/oh/parts/fst-30859-8
https://www.performancetrucks.net/fo...-power-546904/
4700 shipped now SOLD!!!
Parts list:
Maggie 2300 intercooled w/ cog drive and 3.2 pulley
102mm ported inlet
Cogged overdrive rear pulleys and cog belt
Notched fuel rail
Port matched rectangle port lower manifold
RDS phenolic spacer
5" cold air intake tube and K&N filter w/ mounting hardware
Front coolant x-over
Alternator relocate bracket and bolts
Coolant hoses
Gates fleetrunner 8 rib HD belt
New Gates 8 rib HD tensioner #38518
New Moroso coolant tank for battery location
https://www.summitracing.com/parts/mor-63495
New FAST 88lb injectors
https://www.summitracing.com/oh/parts/fst-30859-8
Last edited by 91LT16SpeedFormula; 01-16-2018 at 05:35 PM.
Trending Topics
11-21-2017, 07:34 PM
#8
Well since everyone likes to waste my time and wants but cant have and say oh I can buy something new for that much or I can buy a new bigger blower for a few dollars more, well good luck you cant! Please dont waste my time, if you dont have the money or say Ill think about it, please dont message me. Looking for "serious buyers" only not dreamers. To build this setup from scratch would cost you over $8k so dont tell me this is overpriced
11-21-2017, 09:41 PM
#9
Having just built a similar setup with my TVS2300, I can tell you guys that this is a good deal and a great seller.....Pretty much everything on this setup was modified.....I wish this was around when I bought my used blower.....Goodluck
