Isky Turbo Cam, NW 92mm TB, 5" exhaust cutout
 

Trying to clear out some stuff I have been collecting and no longer need.

Turbo cam specd by stock48, its an isky 3bolt 230/233 600/600 114+4. I attached the cam card picture to this post. Approximately 2000 miles, perfect shape. $325 shipped

Holley-hiram SOLD!

92mm Nick Williams cable TB, painted black to match. SOLD!

Kurt Urban Performance coolant system SOLD!

5" race ready cutout with Y pipe and switch. The ypipe has 4" connections on either end, but can be cut off if you want. I have the switch also but it didnt make the picture. $220 shipped for the cutout, or $300 shipped for ypipe and cutout.
Attachment 91144

Feel free to make offers, I have a wedding to fund!

Paypal is preferred.

Intake and coolant block thing sold!

Price reduced on cam and throttle body, feel free to make an offer!

cam specd for your turbo 408?

402, but yea, specd by jarrett. You know you want it!

i kinda do... ive been thinking about getting a cam from him and this would obviously be just about what hed say for me

Is the V band on the exhaust pipe a regular flat flange, or the vibrant type with the male/female? Does the cutout seal completely?

Also, do you have a pic of where you placed it? I'm trying to think in my head if that will fit next to the trans

Mitch, the cam worked well for me, would probably work better for you actually since you have a better turbo setup.

I cant remember exactly but I want to say its a vibrant male/female vband, I will have to check when I get home. The cutout seals mostly, what I mean is after 30 minutes of driving I might have to tap the button to close it back up, but it doesnt rattle or anything like that. Race ready has a very good customer service and they replace them if they leak.

I have a picture, but cant link it from work. It exited right beside the transfer case and basically sat on top of the transmission crossmember.

I checked the cutout and the entry side has the flat vband (not male/female type like I thought) and the other end has the slip connector so a 4" pipe will fit inside it.

Sent pm

TB is sold!

Still have the cutout and cam!