$525 for the 4l80 strapped to a pallet & shipped to OK (74014)?

Also do you have the stock converter, neutral safety switch, dipstick, or driveshaft yoke?

Tranny is already pending local pickup to MontyCarloSS

The Tranny is just the tranny and the dust cover. I might have the safety switch.

I am sorry for the questions.

I am new to LS engines. I am swapping in a 6.0L (From a 00 2500). I do know that with these heads I will have to upgrade to a TBSS Intake or newer b/c the stock intake will not bolt up. With that being said will above parts stated fit the offset rockers and push rods?

Payment sent.

These heads are a "square port" intake. The orginal intake from your 2000 is a Cathedral. They will need the L92 or LS3 intake to work. Your current sensors will swap over, and whatever injectors you decide to use.
You will also need to get a 90 TB. The old TB sensors will swap over also.

Plan on getting a L92 or LS3 intake with the fuel rail if you already have the orginal intake from your current build.

I did this same heads/intake swap on my 04 3/4 ton.

recieved ! - thanks

sent you a pm, please confirm your shipping address.

Them ding-dongs with the montecarlos always gotta be screwin stuff up! :D

Let me know if that falls through. Im in need of an 80E for my MC.

I really want that motor :-/ bump para el camarada

Bump for a good seller :thumb:

Motor a new style ly6 or lq9 can't really tell. Also 24x or 58?