Shocks are nearly new, they have less than 800 miles total on them. They are for a 2/4 drop, but will work on a 6" flip in the rear. They work fine, but I need money to get my LS1 built. they will also work on a stock height front, but not sure on the rear. They have been drilled on the rears to allow for the stock shock bolt to be used. They are ~$700 shipped new. Looking for $500 shipped for all 4, UPS. Thanks.Fronts sold!!

 

How did they ride ( how smooth ) and are they the ones below in link?
http://speed-eng.com/store/suspensio...3_75_3702.html

 

dam thats a good deal . these are for a 2wd just so you guys know .

how did you like them ? im still trying to dial in good settings for my setup in the front but have only put about a hundred miles on them . i have the double adjustables so its alot more adjusting driving but they are very nice as far as i can tell.

 

they were ok on the smoothness, but I like a stiffer ride. The fronts are the same as the link, but the rears are different. for a 4" drop in the rear. I can sell the fronts for $250 shipped.

yes, 2wd. they were ok, but I didnt get to really test them out to get them dialed in. I have a buddy with them, and trully dialed in they are smooth as glass. I need machine shop money right now, and I wont be able to test them on the track for a while.

 

bump for the day

 

fronts sale pending

 

the back should fit anything with a 4 inch drop correct? 2wd or 4wd. or are the back different also.

in simpler terms...Will they fit a SS

 

not for torsion bars

 

Those are some bad *** shocks, good luck with the sale.

 

I know the fronts are different. What different about the backs?