thunder550

iTrader: (70)

Homemade coil pack relocation bracket and MSD plug wires cut to fit. Relocates coil packs to rear of engine between it and the firewall. $100 + shipping.

Note - coil packs are not included, plug wire looms are not included.

JakeBrakeIH

iTrader: (22)

can you replace wires if one burns easy? or do you have to take the intake off?

i take it to install this you must take the intake off without removing the engine?

BTW pretty interested

thunder550

iTrader: (70)

I haven't tried replacing a wire so I'm not 100% sure how you would go about it. It might be possible to pull it from underneath the truck, reaching up and over the trans bellhousing.

To install this you will need to remove the intake manifold.

JakeBrakeIH

iTrader: (22)

PM sent

thunder550

iTrader: (70)

Sold!

Phantom

iTrader: (16)

Dammit!!!!

Aquinosteven

iTrader: (1)

Sorry to bring this back up but does anyone have another one of these. Is there a company that produces them. Im looking for a kit for my 5.3

thunder550

iTrader: (70)

All you need is some threaded rod, aluminum tubing, aluminum strip, and some washers and nuts. Really easy to make on your own. Less than $10 worth of parts at the hardware store IIRC.