LS rocker arm trunion upgrade
4 Attachment(s)
This is the 13702-KIT from Comp Cams.
I have already upgraded a set of rocker arms with the trunion upgrade kit. The kit cost me $130. I figure roughly $20 for labor and $50 for the set of rocker arms. Making that $200 even plus $10 shipping cost and paypal fees of 3% which is just under $6.50. I did use a set of used rocker arms for this swap. Pictures are below, and as you can see, the lettering on the bearings is facing outwards. Yes, I made sure ALL of mine are facing outwards. I even made sure all the clips eyelets are facing up!! LOL I can have them on the way to you within 24 hours of being paid for. Total cost is $216.50 via paypal. Cheapest set I found on ebay was $245. All rockers came from a pair of 243 cylinder heads except for one that came from a 706 head. It is identical to the rest. I will only ship to the 48 states. |
Price reduced to $185 shipped. Only reduction I will do. If they aren't sold by Monday morning I am going to use them.
Then have another set for sale in a few weeks once I get the rockers off the engine I bought upgraded. |
You got any use for some ls3 stuff? I've got a crank, 6 or 7 pistons and rods, lifters, timing cover, chain, timing gear, cam, valley cover, block mains, valve covers, oil pan... I think that's about it
|
No, sorry. I have a 5.3
|
To be honest, Only stuff I am looking for at the moment is edelbrock Victor Jr carb intake, 6LS MSD box and harness for 24 tooth reluctor, or a good 850 or 950 holley double pumper carb, Nothing that needs to be rebuilt. Tuning or adjusting is ok, but nothing needing a complete rebuild.
|
All times are GMT -5. The time now is 07:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands